Barneys Freighter pack question

LK2HNT

Lil-Rokslider
Joined
Aug 19, 2019
Messages
114
Just picked up the famous Barneys Freighter pack, just the actual frame pack itself with meat shelf bag not included. My question is there are no cam straps to secure the quarters to the frame, how are you guys securing your meat? bungees? para cord? some type of after market cam straps? thank you
 
Joined
Aug 10, 2020
Messages
3
interested in this as well. just picked up a barney's frame and planning on using a bunch of straps but would like to know if everybody had a better method.
 
Joined
Feb 19, 2014
Messages
1,007
1" NRS style loop straps. Easy and bomber holding power. I loop 4 of them onto the frame and it's a moose hauling machine.


Sent from my SM-G975U using Tapatalk
 

EastMT

WKR
Joined
Dec 19, 2016
Messages
2,872
Location
Eastern Montana
Here’s what I did

I bought a grommet kit and webbing straps, buckles. I heated the grommet die up with a propane torch and melted the hole for the grommet. Place grommet in, then fit to the pin in the frame. Always take a couple extra pins and cauter pins, available at Home Depot.

I put 4 on there but the top one is pretty much useless. I also picked up some aluminum bar stock and moved the load shelf down low, carries a little extra gear or bear hide there nicely with the bag on. Here is a pic with half a bone in caribou and the head my wife got last year.

Also, if you go on Amazon and look for the alps outdoorZ bag, $53 and you can insert the grommets in the correct places to fit you pins as well, 32 oz bag, been on a sheep hunt, 2 goat hunts, caribou, bear all over AK. Holds up fine so far. I have 2 Barney’s now, have taken a few family/friends hunting and nice to have an extra around.

Also as you can see I use an eberlestock gun scabbard to carry my rifle with meat only, makes it super nice to have it handy when bloody.

a46a7e5dfa19dc2d1f3d9b9fad568a72.jpg

38f66dfd62da87510bf7f953bf690d2c.jpg
 

AKHUNTER

Lil-Rokslider
Joined
Sep 30, 2013
Messages
222
Location
Interior Alaska
I did about what Coop did. I just took 1" webbing, doubled over the end, burned a hole in it, and secured it to the pack with those aluminum pack pins. I attached a plastic snap buckle to the other end of the strap. I think I installed 4 straps (each side). It makes it very easy to secure loads. It's a little more work than just using the loop and metal rafting strap, but also lighter than those straps.
 
Joined
Feb 19, 2014
Messages
1,007
Handy thing about the raft straps, is they're great to hang meat on a meat pole back at camp if necessary.

Sent from my SM-G975U using Tapatalk
 

Wildwillalaska

Lil-Rokslider
Joined
Sep 26, 2017
Messages
254
Location
Kenai, Alaska
Used to just use para cord. Last several years I’ve just thrown moose quarters/bear hides, etc. in the pack bag—preferably with a compactor bag as a liner.

Anything like cam straps or proper strength rope/chord should work fine.
 

Chirogrow

Lil-Rokslider
Joined
Dec 23, 2018
Messages
270
Is there a lumbar pad on the pack belt? It seems to be very tricky to try and find information or good pictures with this pack! I’m struggling to see why this pack is so comfortable while it seems so simple!
 

hiway_99

FNG
Joined
Mar 22, 2016
Messages
59
Is there a lumbar pad on the pack belt? It seems to be very tricky to try and find information or good pictures with this pack! I’m struggling to see why this pack is so comfortable while it seems so simple!
There current pack doesn't have a lumbar pad. I've heard they are supposed to come out with one shortly

Sent from my SM-G988U using Tapatalk
 
Joined
Jan 6, 2014
Messages
965
Location
AK
There is an available lumbar pad available as an accessory to the hip belt. Here is a picture of the new lumbar pad and the new hip belt pouches on the pack. I'd highly recommend both, especially the lumbar pad when it comes to packing heavy loads.

I7FfI24.jpg
 

Chirogrow

Lil-Rokslider
Joined
Dec 23, 2018
Messages
270
There is an available lumbar pad available as an accessory to the hip belt. Here is a picture of the new lumbar pad and the new hip belt pouches on the pack. I'd highly recommend both, especially the lumbar pad when it comes to packing heavy loads.

I7FfI24.jpg
Fantastic! Thanks for the info and picture. Is there a way to hook up a nalgene or any kind of bladder on the belt? How do things attach on the belt? Thanks again!
 
Joined
Jan 6, 2014
Messages
965
Location
AK
Fantastic! Thanks for the info and picture. Is there a way to hook up a nalgene or any kind of bladder on the belt? How do things attach on the belt? Thanks again!

I am sure something could be rigged up fairly easily to attach a Nalgene. In fact, I think I've seen neoprene Nalgene bottle holders that attach with a velcro strap, those would probably be perfect.

As far as the lumbar pad, it attaches on the belt with a velcro strap, and the hip pouches slide over the ends of the hip belts. I did a gear review in the sheep forum and talk a bit about the Barneys pack, ya might check it out.
 
Joined
Dec 30, 2017
Messages
958
Location
NEW JERSEY
1" NRS style loop straps. Easy and bomber holding power. I loop 4 of them onto the frame and it's a moose hauling machine.


Sent from my SM-G975U using Tapatalk

Thanks for the share. I will be buying some of those.


Sent from my iPhone using Tapatalk
 
Top