Archery Iterations or Steps as a new bowhunter

Joined
Oct 10, 2018
Messages
77
I'm curious to get people opinions of the steps or iterations that a new archery hunter goes through? I'm at the point now where I'm wanting to challenge myself past 50 yards
timeline is
1 bought bow package & arrows with full set up from archery shop, shot in backyard & at shop
2 shot at club summer friday night shoots
3 joined archery club
4 first 3-d shoot
5 got advice from members about shot process & things to do or avoid. definitely want to keep doing this.

still running original bow set up and now I'm thinking of maybe upgrading equipment
-5 pin to slider as I'm now getting past 50 yards and holding over on the level isn't viable anylonger
-increasing draw weight
-buy off the shelf arrows vs get custom (where to even start?) as I'm now losing / breaking them more often since shooting more and course has rocks and sticks etc. infront or 3-d targets. I could tell you the spine & field tip weight, but not the arrow weight?
-chronograph for arrow speed for sight tape? I tried the arrow speed app but my club is near a freeway and there is too much background noise for it to work.
-what else should I consider?

where are some places to get coaching on shot process? is online/virtual a reasonable or does it need to be in person?
 
Definitely think that you're on the right track. First upgrade I would consider would be a dropaway rest if you don't have one. Slider sight will also be a nice upgrade for you. What draw weight are you at? I would slowly increase 1/2 a turn (or more) in your limb bolts once a week until you get to 70, assuming you shoot every day.

As far as starting to set up stuff at home and tinkering, I think building arrows is a great first step. You can research various options, but I think you can't go wrong with the OMP Phoenix jig.

You will probably want an arrow saw next (you can typically buy shafts pre-cut or have your shop cut them). I recommend the Mod Saw - it works well and doubles as an arrow spinner.

Pick a shaft, get some vanes, and start experimenting. What arrows are you running now? If you like your current setup, buy the same vanes, and you can now repair stuff.

Chronograph is probably a good next step after that for sight tape building, but unless you are tweaking your setup a lot you can probably get by with just borrowing one to get set. I would try to find someone at your club or a friend who might have one, unless you plan to mess around a lot or also do rifle handloads or something.

If you have a newer bow with off-press tuning capability, a press and draw board would probably be your lowest priority.
 
Definitely think that you're on the right track. First upgrade I would consider would be a dropaway rest if you don't have one. Slider sight will also be a nice upgrade for you. What draw weight are you at? I would slowly increase 1/2 a turn (or more) in your limb bolts once a week until you get to 70, assuming you shoot every day.

As far as starting to set up stuff at home and tinkering, I think building arrows is a great first step. You can research various options, but I think you can't go wrong with the OMP Phoenix jig.

You will probably want an arrow saw next (you can typically buy shafts pre-cut or have your shop cut them). I recommend the Mod Saw - it works well and doubles as an arrow spinner.

Pick a shaft, get some vanes, and start experimenting. What arrows are you running now? If you like your current setup, buy the same vanes, and you can now repair stuff.

Chronograph is probably a good next step after that for sight tape building, but unless you are tweaking your setup a lot you can probably get by with just borrowing one to get set. I would try to find someone at your club or a friend who might have one, unless you plan to mess around a lot or also do rifle handloads or something.

If you have a newer bow with off-press tuning capability, a press and draw board would probably be your lowest priority.
Thank you! Glad to hear you think it’s the right direction.

Bow came rig drop away rest don’t seems like slider is next then building arrows.

I’m at 55lb now and shoot weekly not daily so I’ll revisit that in my schedule and see what I can eliminate or hire-out so I can shoot daily.
 
I recently seen a video that elk shape, Joel turner and MFJJ did on shot execution.
Something Joel Turner said made me stop and think. He had said we go to the gym to get our reps to build up strength. We go to the range to get our reps to for our brain.
If we just go through the motions at the range it can do more harm than good when it comes to executing good shots.
 
I think at this point in your journey a coach or coaching on shot process is the number one thing you could do for yourself. While I haven't bought Joel Turner's ShotIQ course I do think he has a lot to teach. Though, if you had a good local coach I think that could be better. Either way though, form/execution coaching will pay dividends for a very long time and you could get in front of bad habits that will be harder to break as time goes on.

As for gear, I personally would start with arrow building over anything else. You'll save money, maybe, but you'll also better understand how your arrows are impacting flight and what shoots best in your bow. You could start with a fletching jig, grain scale and squaring tool, then add arrow saw.

I have a slider and I, personally, don't know how I would actually be using it without my chrono/custom sight tapes. I suppose I could do the whole marks on the white tape and figure out which metal tape it is but I much rather use software and make custom tapes. Chrono is pricey though ($500).

Agree on comments above to get up to higher draw weights. Tune your bow/learn about tuning too.
 
What type of release are you using? Might look at other types - training with a tension or hinge can help your process/form, even if you hunt with something else.
 
The best upgrade for you is practice. Practice your shooting. Practice sneaking up on animals in the woods. Bowhunting is most exciting at close range.
 
Back
Top