Amber vs Clear Truck LED Auxiliary Lights

OP
SteveAndTheCrigBoys
Joined
Feb 16, 2021
Messages
1,323
Location
Eastern Oregon
I have no idea what I'm going to do with the other four buttons on an 8-gang switch panel...

Probably going with an EZ Flate CASE air compressor, so no need for a switch for that. Canopy is on order and I'm gonna camp in the bed, maybe some aux lighting there, especially if I can control with an app too. Was thinking winch but backtracking on that a bit...train horn?? (just kidding)
 

WTFJohn

WKR
Joined
May 1, 2018
Messages
442
Location
CO
I have no idea what I'm going to do with the other four buttons on an 8-gang switch panel...

Probably going with an EZ Flate CASE air compressor, so no need for a switch for that. Canopy is on order and I'm gonna camp in the bed, maybe some aux lighting there, especially if I can control with an app too. Was thinking winch but backtracking on that a bit...train horn?? (just kidding)

Get the winch, it won't be used as much as lights but when you need it you will really need it (if you're serious about getting in/out of bad places or find yourself alone in the snow a lot). You could skip the winch bumper, go with a hidden winch mount, and BD makes complete kits with mounts for ditch lights, fog lights, and linkable XLs on the bumper. It would be an ungodly amount of light & money, but would be very straighforward to do especially with a SwitchPro panel.

It's always easier to add stuff later on if it's as easy as connecting to a designated 12V output under the hood vs getting everything cleanly throught the firewall for a new illuminated rocker switch (obviously moot if you have factory upfitter stuff).
 

logem

FNG
Joined
Jan 18, 2023
Messages
82
Location
Santa Fe, NM
I read his articles, and while they have some valid info for older style lights, he frankly doesn't know what cutting edge lighting is or what modern LEDs are capable of in reference to aftermarket lighting like we are referring to.

Edit - I went and looked at his product page. You can judge for yourself if you think that is the same type of stuff we are talking about here. I'm not trying to be a dick, but I don't see a single $1,000,000+ trophy truck (or any other class) running anything Daniel Stern sells. I do see them with the exact same lights you can buy from Baja Designs though.

Here are some similar/relevant articles from Baja Designs:
Amber vs Clear
Lighting Zones Explained
Effective Light Score

He is selling H1 and H4 lights on his website as great high/low beam lights, which in the US are relegated to 1410 lumens and 1650 lumens, respectively per bulb. The Baja Designs Squadron SAE which we are talking about as road-legal fog lights check in at 2420 lumens per light, and the lumens go up from there as you ditch SAE approval (and on-road legality).

@SteveAndTheCrigBoys there is also an SAE approved LP6 on the way, last update I heard was August or so.
OK. Judge for yourself and make your own choices. If you want a $1M trophy truck lighting system then go ahead and get what's brilliant and newly cool, and spend lots of money.

It seems that you have your decisions made. Just increasing lumens or lamp Kelvin to the limits of what is legal in the USA does not increase practicality. Spend some more time on candlepowerforums.com and ask your questions there to get the best answer to your question. I am not an expert.

Yet please consider that on the roads, high lumen headlight lamps/bulbs can be offensive and dangerous because most of them do not have good beam dispersion, resulting in a high level of light projected onto on-coming drivers.

A well designed lamp system is better than a high lumen system.

I respect your decision not contact Daniel, but please don't discount that you will probably receive the best response from him on what to purchase to suit your needs, even if it may be H1 or H4 bulbs and lamps.. His product page is not representative of his knowledge.




I'll sign out of this conversation now. Best of luck to you.

In the end, I suggest you ask this question at candlepowerforums.com, where should get your best answer.
 
OP
SteveAndTheCrigBoys
Joined
Feb 16, 2021
Messages
1,323
Location
Eastern Oregon
Get the winch, it won't be used as much as lights but when you need it you will really need it (if you're serious about getting in/out of bad places or find yourself alone in the snow a lot). You could skip the winch bumper, go with a hidden winch mount, and BD makes complete kits with mounts for ditch lights, fog lights, and linkable XLs on the bumper. It would be an ungodly amount of light & money, but would be very straighforward to do especially with a SwitchPro panel.

It's always easier to add stuff later on if it's as easy as connecting to a designated 12V output under the hood vs getting everything cleanly throught the firewall for a new illuminated rocker switch (obviously moot if you have factory upfitter stuff).
I'll have to find one that works with a steel front bumper that doesn't look terrible. So far the winch compatible ones for the '23 f150 all look like someone with a sever underbite. There's an ADD that looks fine but requires a $2000 intercooler relocation kit for the 3.5L.

I want the truck to be as capable as possible as a hunting vehicle...but I don't want it to look like crap either. Never needed a winch before but I've also never pushed boundaries. I'll think about it. 3 more switches to fill at least! haha
 

WTFJohn

WKR
Joined
May 1, 2018
Messages
442
Location
CO
OK. Judge for yourself and make your own choices. If you want a $1M trophy truck lighting system then go ahead and get what's brilliant and newly cool, and spend lots of money.

It seems that you have your decisions made. Just increasing lumens or lamp Kelvin to the limits of what is legal in the USA does not increase practicality. Spend some more time on candlepowerforums.com and ask your questions there to get the best answer to your question. I am not an expert.

Yet please consider that on the roads, high lumen headlight lamps/bulbs can be offensive and dangerous because most of them do not have good beam dispersion, resulting in a high level of light projected onto on-coming drivers.

A well designed lamp system is better than a high lumen system.

I respect your decision not contact Daniel, but please don't discount that you will probably receive the best response from him on what to purchase to suit your needs, even if it may be H1 or H4 bulbs and lamps.. His product page is not representative of his knowledge.

I'll sign out of this conversation now. Best of luck to you.

In the end, I suggest you ask this question at candlepowerforums.com, where should get your best answer.

You are the only person here talking about retrofitting new bulbs into existing housings, which is almost always a recipe for trouble since the lens/reflector is designed for a certain output & pattern. We are talking about complete lighting systems from BD, the majority of which do not carry an SAE (road legal) approval number and are intended for off-highway or racing use. The ones we are discussing that DO carry the SAE number are a complete housing, reflector, and lens designed from the outset to be used on the road by the premier aftermarket LED company in the US.

I don't think a guy who has spent less on his own website in 20 years than I do on a single tank of diesel, doesn't manufacture anything of his own, and hoards whatever information he knows behind a phone is going to be able to tell me anything about what we are talking about here. Also candlepower forums is about as dead on the automotive lighting side as the D-cell maglite in my shop that hasn't had the battery changed since the turn of the century.

This is not 2008, where information like this is hard to come by (or where you can just proclaim yourself to be the "premier automotive lighting consultancy and supply house. Mr. Stern is an experienced consultant in the field of automotive lighting science and technology, setup, regulation, development, history and modification" without listing a single credential). You can call Baja Designs and talk to any number of their engineers, you can go to multiple retailers and buy their product, you can stop and ask the person pumping fuel at the gas station with a pair of Squadrons, you can turn on KOH/Mint 400/Baja 1000 and see their lights on dozens if not hundreds of custom built race vehicles that have no restrictions on budget and simply want the brightest/best pattern, most durable light avaiable.

It is literally a night and day difference between those two organizations.
 
Joined
Dec 27, 2015
Messages
966
Whatever you end up buying, don’t be a Toyota Chad and show everyone on the road how cool your lighting system is.
You will get flashed, and hopefully cited, and deserve it.
 

Houseminer

Lil-Rokslider
Joined
Jun 29, 2019
Messages
109
I did the SAE fogs in amber. The S8 bar, S1 spots and Pro combos are clear/white.

Here’s a pic with all on
BD0C0871-396E-43E5-9A68-37A89AD018C5.png
 

Latest posts

Featured Video

Stats

Threads
346,883
Messages
3,650,899
Members
79,424
Latest member
avadar911
Top