Aftermarket thumb barrels

[Dirtbag]

Anyone have any good leads on aftermarket thumb barrels? I’m specifically looking for a thinner barrel for a Carter wise choice. Hoping for something metal rather than 3d printed.

 

[Billy Goat]

Why?

Not trying to be a dick, but either the release fits your hand or it doesn't.


Barrel should have enough adjustment it fits your process.

Or you want a giant one so you can punch it faster?

 

[Shooter Mike]

Why?

Not trying to be a dick, but either the release fits your hand or it doesn't.


Barrel should have enough adjustment it fits your process.

Or you want a giant one so you can punch it faster?

I 100% disagree with that.

Depending on where the barrel rests along the thumb, the size of the barrel is absolutely relevant, especially if you're not activating with a "Squeeze" and are using back tension as opposed to pulling through the shot. And not everyone holds the release in their hand the same way. A larger barrel increases surface area contact and therefore increases the potential for sensing any sort of movement. A small barrel can bury in the joint at the base of the thumb, and make solid contact with the bone. A larger barrel cannot achieve that, and that has nothing to do with the fitment of the release. Small barrel or large barrel has nothing to do with punching the trigger, either.

Perhaps you're not completely aware of the various methods for properly activating a thumb button release. If you actually believe barrels are a one-size-fits-all, you have a lot to learn - no two people are exactly alike, hence the reason there is a variety of thumb barrel sizes and adjustability in the releases themselves to fit an individuals hand. This is why Stan has for years, included different thumb peg lengths and barrel sizes with the Perfex and now the Onnex. This is why better quality releases offer adjustment in the thumb peg and barrel position. Using your logic, there isn't any need for adjustment of the release - it either fits or it doesn't. Its just not that simple.

@Dirtbag TruBall makes a 1/4" barrel that can be used on just about any release.

T.R.U. Ball 1/4" Barrel Trigger

• Primarily used for T.R.U. Ball hinge style releases, but will fit on thumb releases with a locking screw • Includes threaded stud • 1/4" diameter • TKTP-S

lancasterarchery.com

 

[Billy Goat]

I 100% disagree with that.

Depending on where the barrel rests along the thumb, the size of the barrel is absolutely relevant, especially if you're not activating with a "Squeeze" and are using back tension as opposed to pulling through the shot. And not everyone holds the release in their hand the same way. A larger barrel increases surface area contact and therefore increases the potential for sensing any sort of movement. A small barrel can bury in the joint at the base of the thumb, and make solid contact with the bone. A larger barrel cannot achieve that, and that has nothing to do with the fitment of the release. Small barrel or large barrel has nothing to do with punching the trigger, either.

Perhaps you're not completely aware of the various methods for properly activating a thumb button release. If you actually believe barrels are a one-size-fits-all, you have a lot to learn - no two people are exactly alike, hence the reason there is a variety of thumb barrel sizes and adjustability in the releases themselves to fit an individuals hand. This is why Stan has for years, included different thumb peg lengths and barrel sizes with the Perfex and now the Onnex. This is why better quality releases offer adjustment in the thumb peg and barrel position. Using your logic, there isn't any need for adjustment of the release - it either fits or it doesn't. Its just not that simple.

@Dirtbag TruBall makes a 1/4" barrel that can be used on just about any release.

T.R.U. Ball 1/4" Barrel Trigger

• Primarily used for T.R.U. Ball hinge style releases, but will fit on thumb releases with a locking screw • Includes threaded stud • 1/4" diameter • TKTP-S

lancasterarchery.com

I think I know exactly how to execute a release properly.


The problem is people get to chasing things within something that isn't the problem. Much like how changing a release will fix target panic.

My logic is around the fact that most of the quality thumb releases have enough adjustability built in that you don't need to go chasing other parts down.

 

[Shooter Mike]

I think I know exactly how to execute a release properly.


The problem is people get to chasing things within something that isn't the problem. Much like how changing a release will fix target panic.

My logic is around the fact that most of the quality thumb releases have enough adjustability built in that you don't need to go chasing other parts down.

Ah. Okay. So everyone has to fit things just the way they are because you say that's the way it's supposed to be. Gotcha. My apologies for not realizing you write the rules of how people are supposed to use their gear.

 

[Sbird2019]

I’m gonna play Switzerland and not comment on the merits or lack thereof like is being discussed above, but Ex-Okie custom knobs by Vernie Broyles makes a custom brass thumb barrels for tons of different releases and sizes and knurling patterns, so he’d definitely be able to help you out.

 

[BigSky]

I’m gonna play Switzerland and not comment on the merits or lack thereof like is being discussed above, but Ex-Okie custom knobs by Vernie Broyles makes a custom brass thumb barrels for tons of different releases and sizes and knurling patterns, so he’d definitely be able to help you out.

Agreed. Vernie does great work. He has multiple sizes and not just in brass as you can also get aluminum. And, they're not real expensive. I think they're $25 to $35 depending on the options you choose.

 

[billysmals]

Another vote fo Ex-Okie. I've used them on two releases. Quick, fair price, better texture. Highly recommend.

 

[Marble]

Ah. Okay. So everyone has to fit things just the way they are because you say that's the way it's supposed to be. Gotcha. My apologies for not realizing you write the rules of how people are supposed to use their gear.

I think the point he is trying to make is that gear changes usually are not the solution for a lot of archery issues. Guys chase this tuff with arrows and releases particularly. And out if all the people on here, Billy Goat is one of the most knowledgeable archers.

I sort of understand what the OP was looking for. But a description of what he doesn't like of would like would helpful.

Sent from my SM-S918U using Tapatalk

 

[CowboyD]

Who prefers a large or small thumb barrel and why?

 

[Billy Goat]

I think the point he is trying to make is that gear changes usually are not the solution for a lot of archery issues. Guys chase this tuff with arrows and releases particularly. And out if all the people on here, Billy Goat is one of the most knowledgeable archers.

I sort of understand what the OP was looking for. But a description of what he doesn't like of would like would helpful.

Sent from my SM-S918U using Tapatalk

I came across brash, it's been a rough few weeks.


But yes, I asked specifically why, but didn't elaborate to why I asked the why.

Almost 100% of the time when I'm seeing guys trying to change out things on their release, it's something else that's the problem, not the fit.

Who prefers a large or small thumb barrel and why?

I don't have much preference, except for hating the giant ones because it's easier for them to be set off accidentally.

On my hinges, most don't have a barrel or peg.


The best way for me to fire a hinge is by relaxing my index finger. It allows the release to roll slightly in my hand, firing it. I of course have back tension, but just pulling back on the release doesn't fire it unless it's a resistance. When using a button, it's the same motions as with a hinge, except your thumb is on the button, and the release gets rotated into the thumb, causing the button to release.

Where those contact points have been aren't too critical, my thumb isn't part of my anchor. When using a button you just know you need some pressure on your thumb, if using a hinge, that doesn't help, so pull the peg on the hinge so you can't hold it. Just make sure you are comfortable in how you load a hinge and settle into it before you pull the peg.

 

[mflo]

Throwing another vote for Ex Okie... absolutely love mine.

I run a bigger barrel than stock, for me it just helped me always pull my thumb around to the same place with less variation.

 

[dylanvb]

Throwing another vote for Ex Okie... absolutely love mine.

I run a bigger barrel than stock, for me it just helped me always pull my thumb around to the same place with less variation.

View attachment 879825

I like your lanyard, Make it yourself?

 

[mflo]

I like your lanyard, Make it yourself?

Its from Darkstararchery.com