88 TMK Loading Thread

Good info in here so far!

I have some 88 TMK’s en route to test in a 20” Proof carbon 22 ARC bolt gun. Powders on hand are H4895, Varget, 8208XBR, and H4350. Alpha brass. I’ll be comparing these side by side to the 85.5 Berger’s at distance as well. I’ll be sure to share data as we go.
 
That’s kinda’ wild that both powders are so slow.

I shot 88 ELDMs over 2900 in a 19” 22-250 with H4350.

Seems like you have another 300fps left on the bone there, no?

3050 fps is all I have been able to get out of 88 hornadys in a 20" creedmoor.

Loaded some 88 tmks this morning but it is too windy for me to try and get groups shot today.
 
3050 fps is all I have been able to get out of 88 hornadys in a 20" creedmoor.

Loaded some 88 tmks this morning but it is too windy for me to try and get groups shot today.
3050 would be in line with what I’d expect I think.

Wonder if the H1000 rate of powders is just a touch slow for some folks Creeds.

I’d like to do a flyweight 18” on a Montana here soon and kinda’ figured I’d just go H4350 like everything else.
 
Looking to have my idea torn to shreds: re-barelling my 9 twist M77 to 223ai with a 7 twist 20-in barrel, PTG bottom metal, water's 2.6 oal magazines. Quickload says that Varget could do 2650 fps for a quick drop correction of +3 out to 550 yards. What am I missing?
 
Looking to have my idea torn to shreds: re-barelling my 9 twist M77 to 223ai with a 7 twist 20-in barrel, PTG bottom metal, water's 2.6 oal magazines. Quickload says that Varget could do 2650 fps for a quick drop correction of +3 out to 550 yards. What am I missing?
For a new system with controllable parameters why settle for the correction factor?

Get a GT or Creedmoor.
 
Back
Top