6UM alternative

[BRTreedogs]

So as a guy that doesn’t chase speed I’m definitely not in tune with case capacity and all that.

But I’ve always heard the 6.5-06 is a dream to load for easy cartridge.

What about a 6-06?

Is there such a thing? What would it do?

06 or well 270 win brass is a dime a dozen and it should feed etc easy peasy.

Maybe even Ai or plus P?

 

[6mm Remington]

So as a guy that doesn’t chase speed I’m definitely not in tune with case capacity and all that.

But I’ve always heard the 6.5-06 is a dream to load for easy cartridge.

What about a 6-06?

Is there such a thing? What would it do?

06 or well 270 win brass is a dime a dozen and it should feed etc easy peasy.

Maybe even Ai or plus P?

Or neck down 25-06 brass which would be even simpler to get it sized properly. I've always thought about building a a 6mm-06. It would be a speed demon. I'm awful partial to the 6mm Remington and it delivers the goods as far as accuracy and speed.

 

[BRTreedogs]

Or neck down 25-06 brass which would be even simpler to get it sized properly. I've always thought about building a a 6mm-06. It would be a speed demon. I'm awful partial to the 6mm Remington and it delivers the goods as far as accuracy and speed.

I have a buddy with a 6.5-06 and he says it was just such any easy button.

Did barrel break in and it just hammers easy peasy.

Personally I loathe reloading so I want factory ammo whenever possible.

But if I had a standard bolt long action laying around I couldn’t resist the 6.5/06 I don’t think.

 

[The Guide]

Any can be made into a 6mm but probably not going to be as easy as the 6UM 30 deg (6 PRC) when their brass does arrive.

The 6UM 30⁰ is a 6 SAUM not PRC.

Jay

 

[GoatPackr]

The 6UM 30⁰ is a 6 SAUM not PRC.

Jay

Your right.
Brain fart..
I'll fix that

 

[RockCreekGuy]

So as a guy that doesn’t chase speed I’m definitely not in tune with case capacity and all that.

But I’ve always heard the 6.5-06 is a dream to load for easy cartridge.

What about a 6-06?

Is there such a thing? What would it do?

06 or well 270 win brass is a dime a dozen and it should feed etc easy peasy.

Maybe even Ai or plus P?

The -06 has about the same case capacity as the 6.5prc. I don't care for the shoulder angle and if we're back to improving we're back to 6UM or Primal's 6PRCai. I don't own an action suited for it either.

 

[Axlrod]

I was wanting a new 6mm about a year ago. After some research, I went with the 6-7PRC (6ROKUM). I had UM build it. It's on a Tikka action in a Rokstok, with UM bottom metal/mags. They already had a reamer. Brass was available as were Hornady 7PRC bushing dies. I picked up the rifle in July, and I am close to 500 rounds through it. The neck clearance was tight on fired Adg brass, so I turned the necks. I am shooting 115 Dtacs at 3212 fps w/N570. I am very happy with it.