6mm creedmoor 4831sc

Joined
Mar 23, 2022
Messages
59
Started load development with my 6mm creedmoor. Carbon six barrel on a kelbly atlas tactical. See what you guys think. I know it’s not the easiest to follow. This is virgin brass on a barrel with about 50 rounds down the tube. 4831sc, berger 108 EH, cci BR2,
 

Attachments

  • 3E2A487D-3DB7-4350-A20F-F52C86A4F2E4.jpeg
    3E2A487D-3DB7-4350-A20F-F52C86A4F2E4.jpeg
    243.3 KB · Views: 80
Haven’t shot it over a chrono yet.

Also no signs of pressure at 45.2 grains. But I feel like I should be getting close
 
Do you have access to RL16? I'm shooting 108 ELD-Ms and 95 LRX over RL16 with no load testing and they both shoot under 1/2" in all three of my 6CMs.

It also makes great groups in my 27 with 130s.
 
Unfortunately I haven’t been able to get ahold of RL16. All I have at the moment is a 8lb jug of 4831sc. These aren’t terrible groups but I’ve chased my tail trying to get something like this to shoot. I need to try to find some RL16
 
I’m not worried about speed. Just more about what the rifle likes. So far I can’t say I found anything it loves yet
 
44 at .035 looks like it printed a really nice tight 3 shot group. I'd play with that a touch maybe. At least load and shoot a couple more groups with that load to verify. It looks like the best out of all of them.
 
I’ve run several other 6mm and 6.5 creedmoor was well as a few 6.5x47 with 4350 and RL16. But haven’t been able to find any and I have heard good things about 4831sc. If I can find with 4350 or RL16 I’ll try it as well
 
I’ve run several other 6mm and 6.5 creedmoor was well as a few 6.5x47 with 4350 and RL16. But haven’t been able to find any and I have heard good things about 4831sc. If I can find with 4350 or RL16 I’ll try it as well
hey Aggies2014, are you still trying to sell that vortex?
 
Back
Top