6mm ARC Velocities

[ckt3]

95s in the mid 2700 fps range may also align better with quick drop (?)

 

[DeepMauka]

we got 2800 ish, cant remember exactly but know it was over 2800, with the 95s. they were not as accurate. I admit i went back an forth between 95s at 2800 vs 107s at 2630 but more accurate. my gun shot a legit 3/8th group with the 107s and shot 108 eldm factories at 2580 pretty much thru the same hole so i went with the 107s. right or wrong i dunno

That’s where I was at too. Slower, but way more accurate. I’ve got 50ish still loaded up of the 95s and lever, but after that’s gone I’m trying the 108s and varget or xbr. The 95s and lever was around 1.2” and 108s were under, but 250-300fps slower making it a 550yd and in at sea level. I have a 20” Howa Mini

 

[HairyScandinavian]

For those of y'all who've shot the 108 M's and 107 TMK's with similar loads are y'all seeing either one has an edge on a wee bit more speed? Not that it matters I'm curious because the weather sucked again yesterday and today so wasn't able to go shoot. Now I got 4 rifles I'm sitting on waiting to test loads so I'm sitting here thinking of what to do with the 5th I'll be adding when I work through some of the others.

 

[Tanner]

For those of y'all who've shot the 108 M's and 107 TMK's with similar loads are y'all seeing either one has an edge on a wee bit more speed? Not that it matters I'm curious because the weather sucked again yesterday and today so wasn't able to go shoot. Now I got 4 rifles I'm sitting on waiting to test loads so I'm sitting here thinking of what to do with the 5th I'll be adding when I work through some of the others.

107s should take a higher charge to hit similar velocities as the bearing surface is greatly decreased compared to a a 108, but you should be able to achieve the same speeds…

 

[KY_coop]

With the bearing surface being less, wouldn't that mean less drag and able to achieve same velocity with less powder?