6.8 Western Powder Choices

[Cliffdog]

I started with Ramshot Magnum in the 6.8 Western a couple years ago because that was the first slower burning powder I could source during a time when supplies were limited. I've since added H1000 to my stock and use it in a 300 PRC. I've tried it in 6.8 Western but circled back to Ramshot Grand in the 6.8 Western with a 151 HHT hammer at 3220 fps.

Just curious what is the powder charge you are using with grand? I’ve been trying to develop a load with this powder but not having any luck. I’m shooting 150 cutting lasers.

 

[fuzzymarindave]

Just curious what is the powder charge you are using with grand? I’ve been trying to develop a load with this powder but not having any luck. I’m shooting 150 cutting lasers.

Running 67.1 gr for that load. I had worked my way up to 3300 fps but got too much pressure sign including primary extraction issues - so I dropped down.

 

[Cliffdog]

Running 67.1 gr for that load. I had worked my way up to 3300 fps but got too much pressure sign including primary extraction issues - so I dropped down.

Interesting. I tried 67.1 of grand but it didn’t group for me. Also was running about 3033 fps. I’m shooting m70 Winchester with 1:8 and 24 inch barrel. I’ve had good success with h1000 at 60 grains. 4 shots under 1/2 inch. 150 cutting edge lasers at 3.036 coal and 150 badlands precision super bulldozer 2 at 2.95 coal. Both shoot under half inch at that powder charge. Just looking for more speed.