Negative, you asked about seating depth, I gave relevant info. If your knowledge of cartridge composition or cartridge/bullet and chamber fitment is little to none, get a 65prc and shoot factory ammo.
Ah, k is thou. Sweet. Now I’m tracking. Reading isn’t my strong suit. Comprehension isn’t in my repertoire
With all due respect reading comprehension will take you a long way in your reloading journey.
Ha. Understood. It was a joke tho. I have 3 technical degrees. It’s just that sometimes I get bit by the raging dipshit bug. Which again, will take me a long way in the wrong direction reloading
Everyone loves a good dumpster fire
I don’t know enough right now. I do have a good mentor for this and not knowing won’t stop me. I’m not a hillbilly that’ll just bubba my way into a load tho. I’ve got a PRC. I’m building a SAUM. I’ll get there slowly
And I’m not an internet troll. I legitimately was confused AF but put two and two together when someone else clarified.
Don’t worry. Everyone starts somewhere. You will be fine reloading. It’s really pretty easy once you get going
I’m not sold on the concept of +P throating. I think the gains are minimal until you get to burning a lot of powder and heavy bullets. Plus (this is speculative on my part) barrel life is compromised especially if running it hot.
I gained 120fps on my 6.5 creed going +p
What I’ve heard is if you’re at pressure, and you have case capacity still you’ll see gains. Now how much well that’s the wildcard.
I have some UM ammo that should do 2900. Much handier in the mountains than a 24" barrel.
2900 out of a 18” is wild
"Should" I'll update once I know for sure.
Agreed, 140s from my 20" don't like going over 2870 with H1000 and lapua brass.
How many rounds did you fire into 1 group to realize that?
