6.5 prc lightweight loads powder suggestions

Prestjd

FNG
Joined
Aug 30, 2019
Messages
92
Location
South East Oklahoma
I'm wanting to try some 99, 110, or 115 hammer hunters in my seekins element 6.5prc.

I haven't found too much load data on lighter bullets. I'm just looking for fast velocities to play around with for coyotes, pigs, whitetail.

I have a few powders that would probably work better on some heavier bullets that I'll probably try if I can't get any of the hammers shooting where I like.

Redding fl and neck dies, Nosler brass, I'll probably use fed 210m primers but have some cci, powderwise I might be on the slow side for light weight mono's

Vv N565
H1000
Retumbo
H4831sc
IMR 4451
H hybrid v100
I have plenty of 223,308 powders like varget, benchmark, blc2, ect. But I'm wondering of maybe even imr or H 4350 might be useful

My local shop has some magnum but was out of ramshot.
Last time I seen RL26 or 23 it was affordable..so it's been a while


Just curious if anyone had any luck with lightweight bullets in the 6.5 prc. I know 124 hammer hunters are popular but I'm not sure I'll get velocities that are significantly faster then the 143,147 hornady eldx or noslers accubonds. I'm not sure I'm ready to go down the berger rabbit hole yet.
 
Last edited:

TaperPin

WKR
Joined
Jul 12, 2023
Messages
3,024
You’ve probably already seen this, but I just happened to have this page on the Nosler site.8E8AE26A-AB91-4218-970E-F5A0EE39E9F8.png
 

sndmn11

"DADDY"
Joined
Mar 28, 2017
Messages
10,084
Location
Morrison, Colorado
I'm wanting to try some 99, 110, or 115 hammer hunters in my seekins element 6.5prc.
But I'm wondering of maybe even imr or H 4350 might be useful
I played 85gr hammers in a 6.5prc and used Staball6.5, which is close to H4350. Case fill was still low, so I wouldn't hesitate to play with it and the bullets you are talking about. It wouldn't surprise me to see over 3500FPS
 

sndmn11

"DADDY"
Joined
Mar 28, 2017
Messages
10,084
Location
Morrison, Colorado
Here's my stuff, I forgot I picked a random charge with 120etips too. There was room to grown there for sure. This is with Peterson brass and I seem to hit pressure a grain or two before other folks using different brass.
PXL_20240828_160549078.jpg
 
Joined
Apr 2, 2023
Messages
13
N560 has been the golden ticket for me with the 124HH. I am getting over 3400 fps with no pressure signs using large rifle primers.
 

260284

Lil-Rokslider
Joined
Oct 21, 2019
Messages
265
I am playing with N560, the 130 Norma, and the 130 SGK. I have them up to 3161 out of a 20" Carbon six suppressed. The barrel only has 90 rounds down it, so it will probably speed up some. I have not hit pressure yet.
 
Top