Sold 6.5 PRC / Borden Alpine Action / Proof Barrel

Status
Not open for further replies.

drtony

WKR
Rating - 100%
10   0   0
Joined
Apr 21, 2019
Messages
408
Location
Minnesota
For sale is a 6.5 PRC built off a Borden Alpine Magnum action.

- Action was cut to accept a Wyatts baney box which would allow you to seat a 156gr Berger out to 3.100 OAL.

- Action also has full Nitride treatment done to it.

- Proof research 7.5 twist 24" carbon fiber barrel chambered with Alex Wheeler's revision 2 reamer.

- Threaded muzzle (3/4-24 threads) and brake turned to mate seamlessly to the barrel.

- Barreled action is pillar bedded into a JCS Composites carbon fiber stock with 2 flush cups on the left side and pic rail up front, stock weighs about 30 oz.

- Rifle Basix Trigger

- Hawkins M5 hinged floor plate.

- Roughly 7 lbs. bare rifle weight.

- Comes with 20MOA scope rail and bipod pic rail


The builder put less than 50 rounds down the barrel for break in and load testing. He held under 1/2 moa @ 500 yards while shooting seating depth tests. Builder shot it out to 1200 yards to verify drops and she shoots awesome. (I have included his pictures of the powder charge test and 500 yard groups)

I personally put 58 rounds down the tube. Shoots factory amazing as well. (pictures shown of my factory shots)

SOLD for Rifle, 40 rounds of custom hand loads (156gr bergers) and load data,

Price is OBO shipped from me to your FFL. IF your FFL requires it from an FFL--add $50.
 

Attachments

  • IMG_3945.jpeg
    IMG_3945.jpeg
    649.5 KB · Views: 199
  • IMG_3946.jpeg
    IMG_3946.jpeg
    451 KB · Views: 194
  • IMG_3947.jpeg
    IMG_3947.jpeg
    467.8 KB · Views: 166
  • IMG_3948.jpeg
    IMG_3948.jpeg
    524.4 KB · Views: 166
  • IMG_3949.jpeg
    IMG_3949.jpeg
    507.8 KB · Views: 159
  • IMG_3950.jpeg
    IMG_3950.jpeg
    364.2 KB · Views: 150
  • IMG_3951.jpeg
    IMG_3951.jpeg
    401.5 KB · Views: 147
  • IMG_3952.jpeg
    IMG_3952.jpeg
    473.3 KB · Views: 136
  • IMG_3953.jpeg
    IMG_3953.jpeg
    351.2 KB · Views: 128
  • IMG_3955.jpeg
    IMG_3955.jpeg
    224.7 KB · Views: 191
Last edited:
OP
D

drtony

WKR
Rating - 100%
10   0   0
Joined
Apr 21, 2019
Messages
408
Location
Minnesota
Factory ELDM and ELDX from 100 yards. I cannot remember which group was which-- it’s the same target.
68927072896__3984985C-0C7C-4406-914B-97E9587982A4.jpeg 68927070867__ECBFA3B7-A59F-43A5-AE3E-B299CCE1106D.jpeg


Builders Charge test
20220309_161832.jpeg

Builders 500 yard groups, The circles are 2" diameter for reference. All shooting was done prone off a bipod with rear bag:
20220310_091514.jpeg
 
Last edited:
OP
D

drtony

WKR
Rating - 100%
10   0   0
Joined
Apr 21, 2019
Messages
408
Location
Minnesota
Is it $3000 OBO or $3650?

Your first post says $3000, didn't know if that was a typo.

killer setup!!
$3000 for the rifle and custom ammo

I edited that other post. I was trying for $3650 for all brass and died and everything. But it wasn’t selling. So now I changed the post to just rifle and custom ammo
 
Status
Not open for further replies.
Top