6.5 PRC 156 EOL Data

[BigDawgWill44]

Does anyone have load data on 6.5 PRC for Berger 156 EOL using H1000? Looking for min/max. Thanks!


Sent from my iPhone using Tapatalk

 

[BigDawgWill44]

Can someone please look in a Berger manual? I don’t have one.


Sent from my iPhone using Tapatalk

 

[MidGAHunter]

Call Berger. They will get you that information over the phone.

 

[7rem]

Min is 54.5gr -2644fps
Max is 60.4 gr -2936 fps
That’s from Berger with H1000

 

[Levi8599]

I ran it in hornady brass and started at 55gr and went to 57gr. I have a 22” proof barrel and it was running no higher than 2800. Switched to adg brass and same charge and it was running 2872 with 57gr and BR2

 

[ScottS_71]

Min is 54.5gr -2644fps
Max is 60.4 gr -2936 fps
That’s from Berger with H1000

Wonder with Lapua brass if that needs to be even lower?

 

[Maidenfan539]

My proof 22" maxed out at 58.2 with Lapua brass and Wing Mag primers at 2880.

 

[NevadaMike]

 

[ScottS_71]

I ran it in hornady brass and started at 55gr and went to 57gr. I have a 22” proof barrel and it was running no higher than 2800. Switched to adg brass and same charge and it was running 2872 with 57gr and BR2

That’s great from a 22” barrel

 

[ScottS_71]

Min is 54.5gr -2644fps
Max is 60.4 gr -2936 fps
That’s from Berger with H1000

My Tikka hit 3000 fps at 59ish grains. Crazy every barrel is different

 

[eyeguy]

My seekins havak hits just shy of 3000 fps with v 565. Shoots better than anything else I have tried. .6-.7 moa average.