33XC Build

The 33XC can get me to 3100 FPS with 300 Grain Bergers with a 24” barrel. I would have to push a 338 Terminator with a 28” barrel hard to get that. But the trade off will be barrel life. Not 338 Snipetac bad but it won’t be my daily driver either:)

Three years later your burning down a 6 UM barrel every other week without any thought
 
They make new barrels every day and with quality stainless barrels only 400-600$ thats cheap. Iv gone back to stainless/carbon steel cartons wraps just arnt worth it they dont really save weight they typically can't be run as hard and they cost twice as much. The only good thing is it easier to mate a can or larger muzzel break to them.
 
I had this rifle built a few months ago. It’s a hammer! And she’s a BEAUT!!

It was built and Cerakoted by @Unknown Munitions

Bat Vesper
Benchmark Custom Contour .338 1/9.5 twist 24”
Manners EH1 Unknown Munitions pinned it
Ti Pro 3
Geissele Super 700 Trigger
UM bottom metal and mag. Rifle is a single feed.
NightForce NX8
10.2 Pounds with scope and two bullets on the side.

$5500 to build

Its shooting Berger 300 grain OTMs at 3100 with Peterson Brass and VV570 powder


644669681c6b364b9cf3a4cc58af1122.jpg

d539b2feabc628397d7a3fc3af600954.jpg

0c9c72b55b7292454877e474447f724d.jpg

aa93e91234c1ce31a6f3b82c6a696c37.jpg

3483c81cff8cd45b6be7b082dc9ff3b3.jpg
Nice. Build
 
Back
Top