SOLD! 338 EDGE FS by Benchmark Barrels - turnkey operation - $4100
338 EDGE For Sale built by Benchmark Barrels - turnkey operation with everything needed - $4100 including shipping to your FFL in CONUS only. Shipping method/case to be discussed with potential buyer. US Postal money orders or Friends/Family PayPal only please.
Do not plan on seperating scope/rifle/Atlas bipod. Package is shooting very well and hate to seperate it. Turnkey operation for someone looking for a ready to go long range hammer.
Atlas bipod, NXS scope, Whidden dies and 37 pieces of ADG 338 EDGE brass (17 awaiting fireforming. 20 have been fired with 9 of those fired one time and 11 fired twice.) all comes with it.
*92g N570 at -.020 with Berger 300 EHs is doing 2802 fps using Magnetospeed V2 and shooting very well, even though I haven't shot precision rifle for nearly 5 months...
Pix of rifle with 205 rounds down the tube. Mostly used Retumbo but latest load is 92g N570 -.020 with 300g Berger EH and Fed 215M primer using ADG 338 EDGE brass. *Atlas bipod with modified Atlas spike feet (rubber feet included also) attached to Atlas Picatinny rail on stock
-Rem 700 SS LA
-PTG one piece bolt
-Trued and built by Benchmark Barrels
-1:9.3 twist 28" Benchmark barrel
-Benchmark side/top discharge brake installed.
-Pacific Tool and Guage (PTG) bolt is custom with .062 dia. (fluted firing pin for lighter weight and quicker locktime) benchrest firing pin, milled sprial bolt fluting, M-16 extractor, PTG spring, milled custom bolt knob on one piece bolt with SS shroud.
-PTG bottom metal
-Wyatt's 4" mag box
-Jewell trigger set to about 1 lb.
-Adj. cheekrest
-GreyBull prone stock with integral aluminum bedding block
-PTG 1/4" recoil lug
-Seekins 20 MOA extended Picatinny rail
-Pachmayr recoil pad
*Scope:
-Nightforce NSX 5.5-22 x 50mm with NPR1 reticle, HighSpeed/Zerostop
-scope level
-Seekins rings - front ring is 6 screw ring
-glass is in great shape. No scratches/marks that I'm aware of. Make an effort to not touch the glass unless gets dirty and a careful cleaning regimen is followed then. Prob been 2-3 years since that was needed with keeping covers on carefully.
More pix:
Jewell trigger set to about 1 lb. pull weight.
Continued below...
338 EDGE For Sale built by Benchmark Barrels - turnkey operation with everything needed - $4100 including shipping to your FFL in CONUS only. Shipping method/case to be discussed with potential buyer. US Postal money orders or Friends/Family PayPal only please.
Do not plan on seperating scope/rifle/Atlas bipod. Package is shooting very well and hate to seperate it. Turnkey operation for someone looking for a ready to go long range hammer.
Atlas bipod, NXS scope, Whidden dies and 37 pieces of ADG 338 EDGE brass (17 awaiting fireforming. 20 have been fired with 9 of those fired one time and 11 fired twice.) all comes with it.
*92g N570 at -.020 with Berger 300 EHs is doing 2802 fps using Magnetospeed V2 and shooting very well, even though I haven't shot precision rifle for nearly 5 months...
Pix of rifle with 205 rounds down the tube. Mostly used Retumbo but latest load is 92g N570 -.020 with 300g Berger EH and Fed 215M primer using ADG 338 EDGE brass. *Atlas bipod with modified Atlas spike feet (rubber feet included also) attached to Atlas Picatinny rail on stock
-Rem 700 SS LA
-PTG one piece bolt
-Trued and built by Benchmark Barrels
-1:9.3 twist 28" Benchmark barrel
-Benchmark side/top discharge brake installed.
-Pacific Tool and Guage (PTG) bolt is custom with .062 dia. (fluted firing pin for lighter weight and quicker locktime) benchrest firing pin, milled sprial bolt fluting, M-16 extractor, PTG spring, milled custom bolt knob on one piece bolt with SS shroud.
-PTG bottom metal
-Wyatt's 4" mag box
-Jewell trigger set to about 1 lb.
-Adj. cheekrest
-GreyBull prone stock with integral aluminum bedding block
-PTG 1/4" recoil lug
-Seekins 20 MOA extended Picatinny rail
-Pachmayr recoil pad
*Scope:
-Nightforce NSX 5.5-22 x 50mm with NPR1 reticle, HighSpeed/Zerostop
-scope level
-Seekins rings - front ring is 6 screw ring
-glass is in great shape. No scratches/marks that I'm aware of. Make an effort to not touch the glass unless gets dirty and a careful cleaning regimen is followed then. Prob been 2-3 years since that was needed with keeping covers on carefully.
More pix:
Jewell trigger set to about 1 lb. pull weight.
Continued below...
Last edited: