300 prc

[TxhunterPRC]

215 and N570 with ADG brass is shooting great for me.

 

[Pilsner]

I need to load up ~100 rounds of 300 PRC with 225 g ELD-M for a last-minute hunt. Enough to zero, get DOPE, build/verify range card, and go hunt with some extras.
I don't have enough Retumbo or H1000 to do it without placing an online order and waiting.
I've got plenty of H4350, H4831SC, and Big Game.
I don't need max velocity just some good, safe, medium loads to be able to do this hunt.
Thanks
-Doc

 

[FLHunter87]

I need to load up ~100 rounds of 300 PRC with 225 g ELD-M for a last-minute hunt. Enough to zero, get DOPE, build/verify range card, and go hunt with some extras.
I don't have enough Retumbo or H1000 to do it without placing an online order and waiting.
I've got plenty of H4350, H4831SC, and Big Game.
I don't need max velocity just some good, safe, medium loads to be able to do this hunt.
Thanks
-Doc

That’s what I switched to. Groups were good but ES was like 45-50. That was with H1000 and the 225. I’m going to load a few of Retumbo and RL26 next. One of these possibly may be better. H1000 is very finicky for me. Only my older 257 Weatherby liked that powder. I got rid of it and have around 11lbs of it lol.

 

[Pilsner]

Wanna sell those 11# by chance?
Have you loaded any of the powders I've got handy yet?

 

[FLHunter87]

Wanna sell those 11# by chance?
Have you loaded any of the powders I've go handy yet?

I won’t sell all 11 but I can definitely sell 3-4 lbs tops. Message me if you’d like. And no. Those seem too fast of a powder for that caliber.

 

[Pilsner]

I'll DM ya when I get some free time. Thx,
I was afraid of that conclusion,
I did find another partial pounder of H1000 so I might have enough to load 50 to 100 rounds using the recipe I've got handy.
Appreciate the replies folks!

 

[tommy64red]

Has any body tried and berger 220 hybrid and what brass is best for the 300 prc

 

[FLHunter87]

Has any body tried and berger 220 hybrid and what brass is best for the 300 prc

You’ll get tons of answers. I would pick what you want and go from there honestly. I only have experience with Lapua, Hornady, Starline, Norma and Nosler. I’ve had good results with all and using with multiple calibers. I use Lapua for the most part. But I use Starline for my 6.8SPC and it’s very very consistent. I actually wouldn’t mind finding some to try for a 300 PRC or my 6.5PRC. No experience with that bullet. Only Berger 212s and now working with 225 ELDM for the 300 PRC.

 

[Judd]

Has any body tried and berger 220 hybrid and what brass is best for the 300 prc

You know why everyone compares their brass to Lapua, right?

 

[tommy64red]

Yeah I believe they are the best

 

[Jbirdhunter]

Berger 245gr over Vin N570. It’s shooting exceptionally well out of my 300 prc with a 26” barrel getting 2950 fps. It’s a heavy rifle with a good muzzle brake, so recoil isn’t bad. I don’t think I would shoot this load in a light weight rifle though.

How many grains of N570 were you using?

 

[chicoredneck]

How many grains of N570 were you using?

I sent you a PM.