280 AI bullet selection

LightFoot

WKR
Joined
Feb 21, 2016
Messages
1,453
Location
Texas & Alaska
EDIT: I went through a bunch of factory options and reloads. I changed optics and mounts. I did not find a load with the precision I was after. After exhausting all the options I was willing to try, I sent it to be with someone else who was willing to work with it.
 
Last edited:

jzeblaz

WKR
Joined
Mar 23, 2012
Messages
349
Location
Santa Rosa, CA
Hey there. Good question! I've shot elk from my 280 Rem. with both the 168 Berger and 168 LRX, at around 2800 fps. Both died pretty much immediately, one was a cow at 220 yards with the Berger and pretty big bull at 80ish yards with the LRX. If it was me, I'd stick with the mono metals. They can be a little tricky to dial in sometimes, but Bergers seem to have tremendous accuracy. I'd say your larger question with the Bergers is at close range, sub 100 yards, I'd think them less ideal. I'm working up loads with Hammer bullets this year. They show a lot of promise and seem to check all the boxes. A bullet I have and would consider is the 160 Accubond. They seem to have a stellar reputation and are plenty accurate. I'm in a state that requires leadfree, so I don't load up the leadies unless I have a hunt out of state in mind. What part of Texas are you in? I've hunted in Hondo once and had a great time. Best of luck and good luck in your search.
 

sneaky

"DADDY"
Joined
Feb 1, 2014
Messages
10,115
Location
ID
That X Bolt has a fast twist barrel on it doesn't it? Opens up a lot of choices. Accubonds, Absolute Hammers, Cutting Edge Lazers, Bergers, Hornady if they're your thing. Mine shoots great with everything from 140 SGKs, to 145 LRX, 155 terminal ascent, 140 Accubonds, 168 VLDs. Most 280AI aren't too picky, that's why they're fun to shoot.
 
OP
LightFoot

LightFoot

WKR
Joined
Feb 21, 2016
Messages
1,453
Location
Texas & Alaska
Hey there. Good question! I've shot elk from my 280 Rem. with both the 168 Berger and 168 LRX, at around 2800 fps. Both died pretty much immediately, one was a cow at 220 yards with the Berger and pretty big bull at 80ish yards with the LRX. If it was me, I'd stick with the mono metals. They can be a little tricky to dial in sometimes, but Bergers seem to have tremendous accuracy. I'd say your larger question with the Bergers is at close range, sub 100 yards, I'd think them less ideal. I'm working up loads with Hammer bullets this year. They show a lot of promise and seem to check all the boxes. A bullet I have and would consider is the 160 Accubond. They seem to have a stellar reputation and are plenty accurate. I'm in a state that requires leadfree, so I don't load up the leadies unless I have a hunt out of state in mind. What part of Texas are you in? I've hunted in Hondo once and had a great time. Best of luck and good luck in your search.

Thanks for the reply. I live in College Station.
There are some great hunting spots in Hondo. I tool a good Stag and Whitetail in Hondo.

I'm keeping my eye out for the 160 Accubond and 145 (and 168) LRX.

I have some Hammer bullets in .308 but haven't shot any yet. I would love to hear how it goes with your 280.

Sent from my SM-N975U using Tapatalk
 
OP
LightFoot

LightFoot

WKR
Joined
Feb 21, 2016
Messages
1,453
Location
Texas & Alaska
That X Bolt has a fast twist barrel on it doesn't it? Opens up a lot of choices. Accubonds, Absolute Hammers, Cutting Edge Lazers, Bergers, Hornady if they're your thing. Mine shoots great with everything from 140 SGKs, to 145 LRX, 155 terminal ascent, 140 Accubonds, 168 VLDs. Most 280AI aren't too picky, that's why they're fun to shoot.
Yes to barrel twist. I believe I could stabilize 180s, not that I want to... but then again...

Sent from my SM-N975U using Tapatalk
 
Joined
May 25, 2022
Messages
426
Location
america
That X Bolt has a fast twist barrel on it doesn't it? Opens up a lot of choices. Accubonds, Absolute Hammers, Cutting Edge Lazers, Bergers, Hornady if they're your thing. Mine shoots great with everything from 140 SGKs, to 145 LRX, 155 terminal ascent, 140 Accubonds, 168 VLDs. Most 280AI aren't too picky, that's why they're fun to shoot.
1/8 twist
 
OP
LightFoot

LightFoot

WKR
Joined
Feb 21, 2016
Messages
1,453
Location
Texas & Alaska
Tried the one box of factory ammo I could find:
Nosler 160 Partition.

Gun didn't care for the ammo much.
~1.5MOA off bipod and rear bag.

Waiting on some 140 VLD from Unknown Munitions.

Thinking hard about 180 VLD-H or 175 ELD-X if I can find any.
06da1d803ca3fa990a0a51acfc3b8542.jpg


Sent from my SM-N975U using Tapatalk
 
Joined
Feb 17, 2017
Messages
666
168 Berger VLDs will shoot well out of your 280ai. Try H4831. They shoot well out of any 7mm. I’ve done development on about a dozen different 7mm in past two years and all ate 168 VLDs nicely.
Anecdotal but I killed a bull with my 280ai running 168vlds at 2940…he was 806 across a canyon. High lung behind shoulder dropped and died right there.
With Berger’s I prefer a high lung shot…stay away from bone they will come apart a little too much when impacting bone.
 

Llama32

WKR
Joined
May 24, 2016
Messages
435
Location
north central Texas
I just bought a Browning X-Bolt Pro 280 A.I. and a Swarovski X5i 3.5-18x50 (on sale at Eurooptic).

Got a couple boxes of Nosler 160 Partition and ordered 50 rounds of 140 VLD from Unknown Munitions.

After barrel break-in, I am going to have a load built up for backcountry hunting up to and including elk. I have taken game out to 425 and I do not anticipate shooting beyond 500.

My current plan is loading the Berger 168 VLD to 2950+ fps. I want one bullet for everything.

Can I trust this bullet on Elk and quartering shots?

Should I go with a mono-metal like the CX or LRX?


4953f18700500ce82610b97c0dfb4dde.jpg
Am I 280AI with a 26-in barrel I shot the 162 eldms and I have shot some of the 150 Nosler ABLR
H4831sc or VV160
Magnum primers

Work magic on anything in North America elk and down
 

vermeire

Lil-Rokslider
Joined
Feb 6, 2017
Messages
124
155 terminal accent 150/162 eldx
I found 200 (maybe 250) Terminal Accents for my 7 WSM on GunBroker a couple years ago. They were pulled from factory ammo but that doesn't bother me. Keep looking. Or bite the bullet (ha ha) and buy some ammo to disassemble.
 
Joined
Sep 8, 2023
Messages
15
Running 140gr Hammer at 3280FPS, 20" barrel. My go to everything N. American species. Love the light weight carry, short barrel, got her dial into 720 yards. Game hunts have been between 30 - 210 yards (so far).
 

204_ruger

Lil-Rokslider
Joined
Apr 24, 2020
Messages
131
I have a new Browning Xbolt Hells Canyon Speed Long Range 280AI. The rifles have a 1@8 twist barrel. Has a Leupold VX6 HD 4-24x52mm TMOA reticle. I bought my to take on a spring bear hunt next spring. I got ELD in 162 175 and 180 gr bullets. I have 168 gr berger, Accubond LR . I have been buying several different brands to try. I live in Arkansas. Will use it on deer and hogs too.
 

204_ruger

Lil-Rokslider
Joined
Apr 24, 2020
Messages
131
I am going to try some of the Berger bullets. In Classic Hunter in 150 gr 168 gr and 175 gr Elite Hunter.
 

Avonac

Lil-Rokslider
Joined
Oct 17, 2014
Messages
127
I pushed the 168 Bergeron’s right at 2900fps and they were straight killers and shot very well.
 
Top