25 prc? 25-7 prc? Experiences? Gotchas? Intangibles?

[806guns]

Nice rifle, but hows this in a 25prc or 25/7 prc thread?

Guess a 25 saum isn't in the realm of a 25 prc ?

 

[ezwy]

Guess a 25 saum isn't in the realm of a 25 prc ?

I appreciated the comparison.
My 21” 25 prc is running 134s just under 3000 (2990-2995) but I did the same loads in some Hornady brass I got off a buddy instead of my adg and definitely got pressure signs there, so I need to back it off a bit.

 

[806guns]

I appreciated the comparison.
My 21” 25 prc is running 134s just under 3000 (2990-2995) but I did the same loads in some Hornady brass I got off a buddy instead of my adg and definitely got pressure signs there, so I need to back it off a bit.

Good to know, im only 60 rounds in and definitely didnt run it up to pressure but I feel there is a touch more case capacity to go.

 

[SlimCreaper25]

20" 1:7 25 Saum PPB reamer
135gr Bergers at 2925 fps
N565 shot amazing
Built on a Kelbly Atlas Lite
Plan on shooting 145gr Black Hole bullets next for Aoudad and White tail.

View attachment 961150

That wood stock is nasty. What’s it weigh??


Sent from my iPhone using Tapatalk

 

[806guns]

That wood stock is nasty. What’s it weigh??


Sent from my iPhone using Tapatalk

Around 28 ounces.

 

[schmidty3]

It works

 

[SlimCreaper25]

Anybody know where a guy could find a 25-7PRC reamer to rent?

 

[Karl B]

Anybody know where a guy could find a 25-7PRC reamer to rent?

West texas ordinance rents them. Its a good reamer. I recently finished one up and its a fun and impressive chambering.

 

[SlimCreaper25]

West texas ordinance rents them. Its a good reamer. I recently finished one up and its a fun and impressive chambering.

Sweet. I thought about just ordering one from them but didn't know they rent them. Thanks!

 

[Karl B]

WTO Reamer Rental – West Texas Ordnance, Inc. | Custom Rifles & Accessories

westtexordnance.com

 

[Karl B]

PBB uses the WTO reamer as well. Thats what this barrel is. 20" .750 taperless. Coasting 135 bergers at 3175fps.

 

[SlimCreaper25]

That's what I'm hoping for! Got a Carbon6 coming for a suppressed 20". Was hoping for a 134 @ 3150

 

[schmidty3]

And if anyone reads this from the beginning....

Wto has 25-7 headstamped brass and dies coming

 

[806guns]

And if anyone reads this from the beginning....

Wto has 25-7 headstamped brass and dies coming

Its already out

 

[Karl B]

And if anyone reads this from the beginning....

Wto has 25-7 headstamped brass and dies coming

Yeah figured that one out a few weeks AFTER I sized 200pcs of peterson

 

[SlimCreaper25]

Did you size down in one step?? I got 200 pieces of ADG 7 PRC. And assuming a 7 PRC go/no go gauge works??


Sent from my iPhone using Tapatalk

 

[Karl B]

Did you size down in one step?? I got 200 pieces of ADG 7 PRC. And assuming a 7 PRC go/no go gauge works??


Sent from my iPhone using Tapatalk

I personally did 3 steps. I had the bushings and I hate ruining brass.

.298
.288
.281

bring it back up with a .2560 mandrel. Didnt lose a single piece.

 

[SlimCreaper25]

I personally did 3 steps. I had the bushings and I hate ruining brass.

.298
.288
.281

bring it back up with a .2560 mandrel. Didnt lose a single piece.

Sweet. I’ll probably do something similar. Thanks!