25-7 PRC Load Work

[MidwestLRP]

Does anyone have any load data on the 25-7 PRC. I have read the articles that West Texas Ordnance has put out, but I was curious if anyone else had any loads worked up for that caliber.

 

[camp run-a-muk]

My coworker built one a few months ago. He got some N560 from me. He's still working on a load. Sorry I don't have any answers for load data. Other than it's finicky but is getting 3150fps with a 134gr bullet. Possible of going up to 3200 plus. (Looked at an old text)
I did the 6.5-7prc. Great results with N570. We both used ADG brass, short action custom bushings for going down in neck size.

 

[MidwestLRP]

I am using WTO’s new 25-7 brass which looks like ADG packaged brass. I was wanting to look at loads for the 133gr Berger Hybrid Hunters using maybe N565. I was also thinking about trying out something a little lighter and seeing how the gun liked that maybe a 115gr.

 

[Jeff_Gibbons]

Following. This cartridge sound very cool. Must rival and possible beat .257 bee. I just built a 25-06 AI and really dig the .257 heavy pills at 3150. Real life laser.

 

[MidwestLRP]

The more I am researching I would like to land somewhere around a 115gr. I might just have to do a little experimentation.

 

[Hoghead]

I shoot pva Cayuga 115 gr bullets out of my 25-6.5 and get 3250 fps. You should be able to beat that with the 7 prc case.

Sent from my SM-G781V using Tapatalk

 

[sportsmans challenge]

I have a 25/7 prc showing 134 eld's from adg 7prc brass necked down, I am running n570, 215m primers. (Loads below)

Rifle is on a tikka action, 22" 1:7.5 twist mcgowan stainless with a thunderbeast 7 ultra can, running 3230 to 3240 fps and shoots great to over 1100 yards so far. Pretty sure I swapped scope to trijicon tenmile right after this picture.

Wto has good Info, why deviate from that?

Guy who is on here has 25/7prc git me in touch with the guy who chambered my rifle and we run very similar loads.