2023 preparations

cck311

FNG
Joined
Apr 23, 2020
Messages
68
Bare shaft and fletched arrow at about 25 yards. .400 spine gold tip blems, 30 inches long with a 50 grain gold tip fact weight insert and a 125 grain point. 475 grain total arrow weight out of a 46 pound at 26.5 inches draw Martin Hunter. In a little less than 3 months I will be hunting Utah elk and muleys!
 

Attachments

  • 0604230947_HDR.jpg
    0604230947_HDR.jpg
    567.7 KB · Views: 46
Joined
Aug 6, 2017
Messages
970
Location
West-central MN
That sounds pretty stiff based on my experience. 650gr 30.25" arrows with 250 up front were just slightly stiff for me out of my recurve ([email protected]"). That said if they're flying well for you no need to second guess.
 
OP
C

cck311

FNG
Joined
Apr 23, 2020
Messages
68
That sounds pretty stiff based on my experience. 650gr 30.25" arrows with 250 up front were just slightly stiff for me out of my recurve ([email protected]"). That said if they're flying well for you no need to second guess.
Out of other bows I have at around the same poundage it would be, but the Martin Hunter is cut past center which makes a difference. I would have to go to .600 spine to shoot a similar arrow in my 45# ben pearson bushmaster.
 
Last edited:

Aklongbow

FNG
Joined
Feb 20, 2022
Messages
54
Location
Alaska
Nice !!!
. Every year I struggle with which bow I will hunt with ....... So this year for moose season I have settled with my 64" 60#@28 Selfbow . I will most likely be shooting my Bamboo arrows which weigh in at 647gr and single bevel broadheads or I ma20230709_124929.jpgy go with my Douglas Fir 753gr arrows with 300gr meatheads .....
Most likely the bamboo, just cause I like bamboo ha!ha
 

Beendare

WKR
Joined
May 6, 2014
Messages
9,001
Location
Corripe cervisiam
Thats a beauty Ak- nice work.

I’ve been having some bad luck as I cracked my chosen limb early….and then the riser I liked for this year cracked..along with the replacement. Junked them and got reimbursed by Alt Services.

Then my expensive riser I was using as a backup had a chunk snap off. Sheesh. I should have bought a BW years ago and been done.

I will probably use my tried and true Dryad riser with the Nika or Selengha limbs- at least until my one riser comes back from repair….. currently tuning both
 

Rheron

FNG
Joined
Mar 27, 2017
Messages
64
I drew the UT mule deer buck general season ALW tag. This year the Ogden unit falls into antler less elk control. So I’m sitting on two elk tags and a buck tag this season. Love this state.
 

kfili

Lil-Rokslider
Joined
Apr 10, 2020
Messages
225
Location
VA
Almost same arrow set up as me- glad im not the only one with good results when it "looks" like it would be too stiff.
 

Hawkeye29

Lil-Rokslider
Joined
Nov 29, 2021
Messages
214
I have a very similar arrow setup. Shooting 46lbs and shooting a 400 spine Black Eagle Rampage. Cut them to 29.5”, 75gr hit insert with 175gr heads. Experimenting with FlexFletch vanes and so far I really like them. More durable and easier to fletch than Trad Vanes (don’t beat my ass Aron haha)
95DCF644-5342-4C90-8A59-5BE56D1E53BA.jpeg
ETA: also a 26.5” draw length.
 

Beendare

WKR
Joined
May 6, 2014
Messages
9,001
Location
Corripe cervisiam
I have a very similar arrow setup. Shooting 46lbs and shooting a 400 spine Black Eagle Rampage. Cut them to 29.5”, 75gr hit insert with 175gr heads. Experimenting with FlexFletch vanes and so far I really like them. More durable and easier to fletch than Trad Vanes (don’t beat my ass Aron haha)
View attachment 579656
ETA: also a 26.5” draw length.
Are you shooting off the shelf With those vanes?

The AAE trad vanes claim you can…and they have some new ones coming out.
 

Hawkeye29

Lil-Rokslider
Joined
Nov 29, 2021
Messages
214
I have had success shooting trad vanes off the shelf, they just get chewed up quick! However, I am shooting the flex fletch’s off of a springy rest.
 

bisblue

WKR
Joined
Aug 22, 2016
Messages
466
Location
Cascade Idaho
Still doing some final tweaking but shooting a reflex deflex takedown my buddy made me, #49@30". Shooting a 400 spine 32.75" instinct with ethics inserts that equals 260 up front for a 600 grain arrow. If I can tune them well and drop a little point weight I will.
Doesn't fly super fast but i really like the 32 yard point on for elk season.
Compress_20230604_122353_3513.jpgCompress_20230604_122353_3824.jpg
 

Jlingle

FNG
Joined
May 3, 2023
Messages
13
Nice !!!
. Every year I struggle with which bow I will hunt with ....... So this year for moose season I have settled with my 64" 60#@28 Selfbow . I will most likely be shooting my Bamboo arrows which weigh in at 647gr and single bevel broadheads or I maView attachment 575766y go with my Douglas Fir 753gr arrows with 300gr meatheads .....
Most likely the bamboo, just cause I like bamboo ha!ha
That is one nice rig!!
 

Beendare

WKR
Joined
May 6, 2014
Messages
9,001
Location
Corripe cervisiam
Still doing some final tweaking but shooting a reflex deflex takedown my buddy made me, #49@30". Shooting a 400 spine 32.75" instinct with ethics inserts that equals 260 up front for a 600 grain arrow. If I can tune them well and drop a little point weight I will.
Doesn't fly super fast but i really like the 32 yard point on for elk season.
View attachment 580375
Purdy bow.

I used to shoot a heavy arrow for a shorter PO...but after shooting the 435g arrow I shoot now, it increased my PO but made me more accurate at all distances due to the much flatter trajectory. 40y PO...and my gaps are halved at 20- a big deal- which makes me way more consistently accurate, Works for me.
 

bisblue

WKR
Joined
Aug 22, 2016
Messages
466
Location
Cascade Idaho
Purdy bow.

I used to shoot a heavy arrow for a shorter PO...but after shooting the 435g arrow I shoot now, it increased my PO but made me more accurate at all distances due to the much flatter trajectory. 40y PO...and my gaps are halved at 20- a big deal- which makes me way more consistently accurate, Works for me.
Nice, I feel my most limiting factor is finding long arrows and then having to fiddle with tip weight to get them to tune well.
 

LostArra

WKR
Joined
May 9, 2013
Messages
3,648
Location
Oklahoma
Nice !!!
. Every year I struggle with which bow I will hunt with ....... So this year for moose season I have settled with my 64" 60#@28 Selfbow . I will most likely be shooting my Bamboo arrows which weigh in at 647gr and single bevel broadheads or I maView attachment 575766y go with my Douglas Fir 753gr arrows with 300gr meatheads .....
Most likely the bamboo, just cause I like bamboo ha!ha
Nice bow setup! and a "good dog"!
Did you import that osage to Alaska? I'm assuming that's osage.

I can transport staves for a moose hunt. :cool:
 

Beendare

WKR
Joined
May 6, 2014
Messages
9,001
Location
Corripe cervisiam
Nice, I feel my most limiting factor is finding long arrows and then having to fiddle with tip weight to get them to tune well.
Yeah, same here with a 30 3/4” DL. I shoot a 31 3/8” arrow. The Easton trad shafts come pretty long- I think 33” but they are getting pricey.

I’ve been using the Accmos 6.2mm (std diameter) these come long 33”, at .003” straight for under $40. They have a much better finish than the latest Easton shafts.

Accmos ( and Linkboy) have a bunch of different GPI shafts, I like a minimum of 9 gpi shaft. The 8gpi and under shafts like the Maximas I’ve used over the many decades have proven to break easy.

I used to use more arrow weight to shorten PO like I said…but the better trajectory has made all the difference- much better accuracy. My gap used to be almost 1” at 20y….now its 1/2”. Having the tip of the arrow closer to the spot- no matter what aiming system you use- makes anyone more accurate.

As long as we use a super efficient BH that penetrates effortlessly…we don’t need massive arrow weight.
 
Last edited:

bisblue

WKR
Joined
Aug 22, 2016
Messages
466
Location
Cascade Idaho
Yeah, same here with a 30 3/4” DL. I shoot a 31 3/8” arrow. The Easton trad shafts come pretty long- I think 33” but they are getting pricey.

I’ve been using the Accmos 6.2mm (std diameter) these come long 33”, at .003” straight for under $40. They have a much better finish than the latest Easton shafts.

Accmos ( and Linkboy) have a bunch of different GPI shafts, I like a minimum of 9 gpi shaft. The 8gpi and under shafts like the Maximas I’ve used over the many decades have proven to break easy.

I used to use more arrow weight to shorten PO like I said…but the better trajectory has made all the difference- much better accuracy. My gap used to be almost 1” at 20y….now its 1/2”. Having the tip of the arrow closer to the spot- no matter what aiming system you use- makes anyone more accurate.

As long as we use a super efficient BH that penetrates effortlessly…we don’t need massive arrow weight.
I think it's be too scared of an Alibaba arrow after chasing elk for teeth weeks to get one shot. I got a 544 grain instinct arrow flying really well. I know Gold tip blemishes can be had for pretty cheap too
 
Top