1911’s in general, 9mm versions specifically

[Escalante11]

I was under the impression this thread was about range guns, not carry guns. So a compact anything wouldn't really interest me for that, outside of a full size Shadow 2 not qualifying for IDPA CO if you're into that.

You're probably correct on that. The CZ QC isn't as safe of a bet as people think but it's probably a better bet than a 2011 in that exact price range.

Got it, sorry about that. I shoulda read up on this thread a bit more. I thought y'all were picking up 1911/2011s for bear defense, carry, etc..

I know some of CZ's entry-level polymer offerings have had a few reported issues over the years, but I haven't ever heard much about Shadow 2 quality control not being a sure thing. I'll do some digging there, appreciate you highlighting that for me John.

 

[JohnJohnson]

Got it, sorry about that. I shoulda read up on this thread a bit more. I thought y'all were picking up 1911/2011s for bear defense, carry, etc..

I know some of CZ's entry-level polymer offerings have had a few reported issues over the years, but I haven't ever heard much about Shadow 2 quality control not being a sure thing. I'll do some digging there, appreciate you highlighting that for me John.

Here's a few videos from Ben Stoeger on the general subject of CZ Shadow 2's and how they stack up against 2011s. CZ Shadow 2's can put people into extraction hell specifically, which is hard to get out of. Last step after getting my gun back from Cajun will be getting the chamber reamed to help reliability with a variety of bullets. I'll probably have Patriot Defense do it, it's only like $65.

 

[rileybassman]

I've had good experiences on the CZ front (have had 3-4) and really like my S2 Carry (over the S2 Compact).

It's not a 2011, but I do feel like they are a better value than a staccato C (tho admittedly, my C is my favorite handgun).

Comments above are correct - it is 2 distinct trigger presses - but that is a feature and not a bug depending on your mindset is and SA is an option if you have an offhand shot at a coyote or something at 80 yards.

There are a handful more parts, but honestly, I don't find them that hard to work on... I've completely disassembled 2011s and CZs and both are serviceable IMO. Firing pin retaining pin and trigger return spring are two of the "weaker" points that need to be replaced/serviced.

Parts and holsters are plentiful for CZs. CGW has all you would ever need.

Accuracy wise, the shadow series is so close to the 2011s I have had that I am 100% the limiting factor. Have shot both the C and the S2 carry off of a rest back-to-back, and both are very accurate handguns.

If warranty and support is of value, Staccato for the win, if aftermarket support and parts availability is your jam and you self-smith, CZ for the win.

I've had 1 stoppage (FTF) in the last 1000 rounds with my S2 carry and 0 with my staccato.

 

[Escalante11]

Here's a few videos from Ben Stoeger on the general subject of CZ Shadow 2's and how they stack up against 2011s. CZ Shadow 2's can put people into extraction hell specifically, which is hard to get out of. Last step after getting my gun back from Cajun will be getting the chamber reamed to help reliability with a variety of bullets. I'll probably have Patriot Defense do it, it's only like $65.

Thanks for sharing, just got through them. I should confirm, I'm not questioning the overall draw of 2011s. Hard to compare to a high-end 2011 such as a Staccato.. That said, I'm struggling with the concept that more entry level 2011s (say < $1,500) offer near the value, shootability, or reliability of a Shadow 2 Compact out of the box.

To be fair, Ben is comparing a ~$1,200 Shadow 2 to a ~$6k 2011 that he has refurbished annually. And that really is my whole point here.

I guess I can see the upside and higher ceiling of entry level 2011s if one wants to tinker, upgrade, and mod things out over time. That can be half the fun when it comes to a hunting rifle, but not sure I'd want to go down that route for a personal defense weapon.

 

[RockAndSage]

Given Shadow 2 Compacts can be had for ~$1,100 out the door, are there any current compact 2011 offerings that offer similar high-end performance and QC out of the box for that price?

There are relatively few 2011s in that size range, and even fewer coming close to that price, and even fewer still that are very reliable, unfortunately. 1911s and 2011s just entered a golden age, where reliability has finally caught up to shootability, with the shootability and performance getting even better than ever. But - the reliability issue is still a plague for lesser manufacturers, and it shows up most often in cheap guns. It's a space where, in general, you still get what you pay for. And the demand for a smaller EDC size hasn't really been perceived much by the industry, though that's starting to change fast.

There are a couple of terminology things that might be useful for you. The size range you're referring to here are what you'd generally hear called either a "commander" size, or a "Glock 19" size - bigger are full size, and smaller are more of what you'll hear called "compact". So the S2 Compacts are actually a bit of a confusing use of the word, as they aren't compact guns, as common usage would describe them. They're in that commander/G19 size range.

Another item is what people mean with 2011s, and 2011 vs 1911. They essentially have the same slide and ignition system (hammer, sear, etc), but what people are calling 2011s are the ones using double-stack mags, and 1911s using single-stack mags. It's an issue of complete pedantic gun-nerdery, but technically only Staccato has the branding/legal right to call their guns 2011s.

About the cheapest "2011" you'll find that seems to be reliable enough for work would be Kimber's new DS Warrior. I haven't shot one, but they're getting great reviews. It's not in a commander size yet though. Next bet on cheapest reliable 2011 would probably be one of Kimber's 2k11s, which do come in commander length slides, but you're looking at around $1700. There are others out there, but they tend to be hit or miss on reliability, even by individual guns, so you take your chances if you're looking for stone-cold reliability out of the box. But, this whole thread is great if you really want to learn the system on the cheap, and like tinkering.

 

[B_Reynolds_AK]

Any idea on how much longer you can expect for that Forza to arrive?

I emailed him last night to find out, as I was curious about that too. 12.5 weeks wait right now.

 

[EuroOptic]

Picked her up this morning and ran 380'isn rounds through her with zero flaws.

First time shooting any sort of 1911.

One of the concerns I saw when looking at the Kimbers the C&H plates that came with the gun. Kimber must have listened because mine came with a Tag brand plate.

Other issue I knew about from YouTube was the mag release is stiff. Not sure if there's a fix for that or just needs to be used more.

I will be buying a smaller grip for it. I have really small hands. So I need something that's as slim as possible.
Also already have a shorter trigger shoe coming that will help that too.

As far as shooting it goes, it was mind blowing. First shot was an X at 10 yards. The new SRO was dead nuts on!

It's crazy how much more consistent I am with this thing vs any other pistol. It was child's play to shoot tiny groups. Velo can sized group at 10-15 yards with no crazy wtfs.

The trigger is epic. But to be fair I can only compare it to a higher end Glock after market.

The comp is great!!! I shot at the indoor range so I couldn't shoot more than two double taps. But it was so easy to stay on target and get off two accurate shots. I'll run her out side next weekend and have some real fun. But the comp didn't seem super loud or annoying at all. But switching to my G19 I could definitely feel the difference it makes in muzzle rise.

I don't think I made a bad purchase at all. Just need to maybe change the mag release spring and the grip. And trigger shoe.

Highly recommend

Raised and Extended Slide Release for 1911/2011 Models (Excl. Glock Style Mags)
i run one of these on my XC, and have run them on my glocks for many years.
I couldnt stand having to break the firing grip to drop the slide on a 2011.

 

[Hooked]

At self-defense distances, sight-radius differences in accuracy at speed are pretty minimal. Especially with the blocky sights that are on almost all your common handguns. You'd probably have to stretch a shot out past 50yds for a longer sight-radius to start providing a meaningful benefit. Especially as a novice pistol shooter. It's not an issue I'd be concerned about in practical realities.

Thank you for the explanation. That confirms the sight radius will not have a significant impact on my intended uses for the pistol.

 

[cubdriver84d]

For anyone looking to put an acro on a 1911/2011 that has a k/rmsc cut, the atibal plate is good to go.

 

[Escalante11]

In case anyone is intrigued by the Shadow 2 Compact, here is a quick hack on how to get a great deal. I saw people suggesting it on the CZ Reddit thread so gave it a shot last night. Sure enough, it worked! Picked up a 2nd one to gift to my dad.

Call up Cabelas/Bass Pro Shops and ask for a price match. Give them SKU # 3816753 when they ask what item you want to price match. When they ask you for the price match link, give them this website: https://cz-america.com/cz-usa-shado...-fixed-black-rear-sights-manual-safety-91252/

Website is definetely fake and I'm sure Cabelas will pick up on things here sooner or later, but I can confirm it works as of last night. I paid $1,087 out the door, including taxes and background check fee .

 

[Schmo]

In case anyone is intrigued by the Shadow 2 Compact, here is a quick hack on how to get a great deal. I saw people suggesting it on the CZ Reddit thread so gave it a shot last night. Sure enough, it worked! Picked up a 2nd one to gift to my dad.

Call up Cabelas/Bass Pro Shops and ask for a price match. Give them SKU # 3816753 when they ask what item you want to price match. When they ask you for the price match link, give them this website: https://cz-america.com/cz-usa-shado...-fixed-black-rear-sights-manual-safety-91252/

Website is definetely fake and I'm sure Cabelas will pick up on things here sooner or later, but I can confirm it works as of last night. I paid $1,087 out the door, including taxes and background check fee .

Yeah, since we should take advantage of people and get dishonest discounts

 

[RockAndSage]

Website is definetely fake

It might be good of you to highlight this at the top.

 

[Wapack]

In case anyone is intrigued by the Shadow 2 Compact, here is a quick hack on how to get a great deal. I saw people suggesting it on the CZ Reddit thread so gave it a shot last night. Sure enough, it worked! Picked up a 2nd one to gift to my dad.

Call up Cabelas/Bass Pro Shops and ask for a price match. Give them SKU # 3816753 when they ask what item you want to price match. When they ask you for the price match link, give them this website: https://cz-america.com/cz-usa-shado...-fixed-black-rear-sights-manual-safety-91252/

Website is definetely fake and I'm sure Cabelas will pick up on things here sooner or later, but I can confirm it works as of last night. I paid $1,087 out the door, including taxes and background check fee .

Bad juju right there. May you be reminded of your deception on every miss hahaha

 

[TradLife406]

One issue with this Kimber 2k11 is she doesn't like to chamber hollow points off a full mag. If only load 18 she does ok.
Ordered a Taran Tactical check mate 20 rounder. No issues whatsoever. But the Check Mate mags that make with the gun seem to sit the first round a little funky.
No issues with ball ammo.

So looks like I'll buy another $100 TT mag for carry.

The Springfield prodigy 26 rounder worked great at the range. A cheaper option for fun.

Red dirt trigger came in this week.
MJD grip comes Monday and my lighter mag release spring comes this next week too. We'll see if this Glock window licker can break down a 1911 and put it back together properly. I'm a little nervous.

Any thoughts for a ambi safety for small hands and short thumbs? I want to try a wider one. But I'm worried because they all say "minor fitment required". How bad can it be?

 

[RockAndSage]

Any thoughts for a ambi safety for small hands and short thumbs? I want to try a wider one. But I'm worried because they all say "minor fitment required". How bad can it be?

It's one of the more specialized 1911 things you can learn to do at home and with some YouTube videos, but it's also one that is assisted quite a bit by having the right tools. If you want to do this, or other 1911 work, do yourself a favor and get the 10-8 Performance Armorer's Block, and watch some videos on how to use it.

 

[Bearsniper]

I'm trying pretty hard to like my Staccato C as much as my Shadow 2 Compact...that said I don't mind carrying it in double action around the farm and I may have gotten a sample with a really great trigger. I wouldn't carry either gun for everyday concealed iwb carry. The cz factory aluminum grips are garbage, but I really like the g10 Lok golf ball textured ones. I also got a Dan Wesson TCP the other day and that gun is pretty awesome too--almost the exact same size as the Staccato C minus grip width. But to me there is just something special about the shadow 2 compact.

 

[Dobermann]

Forgive me for a slight derailment but how many guys are actually conceal carrying 2011s? I went to my LGS today and got my paws on a Stacatto C. It felt like it was meant for my hand, but damn those are big hunks of metal! I have no doubts about its shootability, but based on the size it seems like a range toy (or comp gun). If people are hiding these on their body I need to learn what they’re doing.

Check out the Tenicor video I posted earlier that both gives tips on how to properly site and customize your holster, as well as why theirs are some of the most customizable.

 

[Dobermann]

About the cheapest "2011" you'll find that seems to be reliable enough for work would be Kimber's new DS Warrior. I haven't shot one, but they're getting great reviews. It's not in a commander size yet though. Next bet on cheapest reliable 2011 would probably be one of Kimber's 2k11s, which do come in commander length slides, but you're looking at around $1700. There are others out there, but they tend to be hit or miss on reliability, even by individual guns, so you take your chances if you're looking for stone-cold reliability out of the box. But, this whole thread is great if you really want to learn the system on the cheap, and like tinkering.

And don't forget the Buls ...

 

[TradLife406]

It's one of the more specialized 1911 things you can learn to do at home and with some YouTube videos, but it's also one that is assisted quite a bit by having the right tools. If you want to do this, or other 1911 work, do yourself a favor and get the 10-8 Performance Armorer's Block, and watch some videos on how to use it.

So kinda like building AR, it's a pain in the @$$ without the right tools?

Ordered that block. Thanks!

 

[43.6N]

So kinda like building AR, it's a pain in the @$$ without the right tools?

Ordered that block. Thanks!

It’s like building an AR if all the pins and key fittings were shipped oversized, and you need to slowly bring them into tolerance.

It it’s also doable.
Watch the engineer armory video about fitting a thumb safety. That’s a great guide with safety checks.