1911’s in general, 9mm versions specifically

[Formidilosus]

Form - I think I've seen you say this before ... curious as to why? Cheers.

They look stupid… and, the missing spot on the palm feels poor.

 

[Billogna]

Is there a decent 1911in 22RF, or a conversion kit that is good.
If going a conversion it would probably go on a cheap Springfield.
Preferably suited to a dot as I’m getting a bit long in the tooth for open sights

So far the Hammerli Forge has eaten 425 rds straight with one FTE in the final 50 or so. It’s quickly becoming one of my favorite pistols. There’s also some aftermarket support for it which is nice. I dug into it and deburred the sear and hammer hooks. Now she breaks clean!

Edit to add: Adams Arms also has conversions. I'm not familiar with any 22LR 1911 that is milled for red dots yet.

 

[Southernfried]

Over on ar15.com one guy just posted this. This may make my mind up for me between Kimber and Tisas. Will be intersting how it shakes out. I know on their website, they dont even list any of the 1911's except for the link to the MAC line, and they are listed several hundred higher in cost than the Kimber DS Warrior. I really dont know what is going on. Tisas link on ar15 Course if I were just interested in their 1911's, any issues can be easily fixed from the millions of 1911 parts. But, the ds versions, is a whole different ballgame I am guessing. But I could be wrong.
"
Thank you for contacting SDS Arms regarding your Tisas product. We regret to inform you that Tisas USA service support has been discontinued effective immediately. The manufacturer has ended all service and parts support, and we are no longer able to process repairs, warranty work, or parts requests for these models.
We sincerely apologize for the inconvenience and understand this may be frustrating. Unfortunately, this decision was made at the manufacturer level and is outside of our control. Dependent on your warranty claim, you may consider third party options from your local gunsmith.
We appreciate your understanding and thank you for allowing SDS Arms to be part of the Tisas USA journey.


Reyes
Customer Service Supervisor
Main Phone Line: 865-604-6894
Hours: Mon-Fri, 8:30am 4:30pm EST
https://sdsarms.com/ "
I wonder if this press release has anything to do with it?:
TISAS ARMS CORP BEGINS GEORGIA OPERATIONS

BUFORD, GA – Firearms manufacturer and 1911 behemoth Tisas announced today the launch of their new US division located in Buford, Georgia. After twenty years of importer partnerships, Tisas Arms will receive shipments directly from their manufacturing facility in Trabzon, Türkiye, to be sold through their US distribution network for US consumer sales.

To expedite organizational development and minimize disruptions to the supply chain, Tisas Arms CEO Erdal Kaya announced the addition of Tisas-veteran Tim Mulverhill as Vice President of Operations, “I look forward to Tim’s assistance standing up the new organization. He brings several years of experience developing the Tisas brand as well as two decades of industry knowledge to our team”.

Mulverhill added, “I thank Kaya and the Tisas Board for this opportunity. I have always enjoyed working with the Tisas team and look forward to working with Kaya to bring the full range of Tisas products to the United States and further develop the brand”.

Kaya concluded, “We are working around the clock to establish our customer-facing teams to support Tisas customers regardless from whom they purchased their firearm. We will continue to provide great products supported by great service and continue to stand by the Tisas lifetime warranty”.

Customers in need of warranty assistance or general product questions can contact Tisas Arms at [email protected] or reach out through the new website at www.tisasarmsusa.com.

Established in 1993, TİSAŞ (Trabzon Silah Sanayi AŞ) is a globally respected manufacturer of firearms with customers in 26 countries and products in service with 23 government agencies worldwide. For more information about Tisas Arms or Tisas products, please visit the website at www.tisasarmsusa.com or email [email protected] .

 

[lak2004]

Over on ar15.com one guy just posted this. This may make my mind up for me between Kimber and Tisas. Will be intersting how it shakes out. I know on their website, they dont even list any of the 1911's except for the link to the MAC line, and they are listed several hundred higher in cost than the Kimber DS Warrior. I really dont know what is going on. Tisas link on ar15 Course if I were just interested in their 1911's, any issues can be easily fixed from the millions of 1911 parts. But, the ds versions, is a whole different ballgame I am guessing. But I could be wrong.
"
Thank you for contacting SDS Arms regarding your Tisas product. We regret to inform you that Tisas USA service support has been discontinued effective immediately. The manufacturer has ended all service and parts support, and we are no longer able to process repairs, warranty work, or parts requests for these models.
We sincerely apologize for the inconvenience and understand this may be frustrating. Unfortunately, this decision was made at the manufacturer level and is outside of our control. Dependent on your warranty claim, you may consider third party options from your local gunsmith.
We appreciate your understanding and thank you for allowing SDS Arms to be part of the Tisas USA journey.


Reyes
Customer Service Supervisor
Main Phone Line: 865-604-6894
Hours: Mon-Fri, 8:30am 4:30pm EST
https://sdsarms.com/ "
I wonder if this press release has anything to do with it?:
TISAS ARMS CORP BEGINS GEORGIA OPERATIONS

BUFORD, GA – Firearms manufacturer and 1911 behemoth Tisas announced today the launch of their new US division located in Buford, Georgia. After twenty years of importer partnerships, Tisas Arms will receive shipments directly from their manufacturing facility in Trabzon, Türkiye, to be sold through their US distribution network for US consumer sales.

To expedite organizational development and minimize disruptions to the supply chain, Tisas Arms CEO Erdal Kaya announced the addition of Tisas-veteran Tim Mulverhill as Vice President of Operations, “I look forward to Tim’s assistance standing up the new organization. He brings several years of experience developing the Tisas brand as well as two decades of industry knowledge to our team”.

Mulverhill added, “I thank Kaya and the Tisas Board for this opportunity. I have always enjoyed working with the Tisas team and look forward to working with Kaya to bring the full range of Tisas products to the United States and further develop the brand”.

Kaya concluded, “We are working around the clock to establish our customer-facing teams to support Tisas customers regardless from whom they purchased their firearm. We will continue to provide great products supported by great service and continue to stand by the Tisas lifetime warranty”.

Customers in need of warranty assistance or general product questions can contact Tisas Arms at [email protected] or reach out through the new website at www.tisasarmsusa.com.

Established in 1993, TİSAŞ (Trabzon Silah Sanayi AŞ) is a globally respected manufacturer of firearms with customers in 26 countries and products in service with 23 government agencies worldwide. For more information about Tisas Arms or Tisas products, please visit the website at www.tisasarmsusa.com or email [email protected] .

They are importing direct moving forward and saying they will warranty anything imported through SDS previously.

 

[fwafwow]

No problem. I think buying holsters is like buying shoes online ... there's only so far that internet research can take you, unless you already know what you want.


JM makes good stuff and is great to work with; his OWBs are very serviceable (I have one for my CZ). I just think the Tenicor has more to offer for AIWB custom fitting.

JM confirmed that their CUSTOM AIWB Holster – Wing Claw 2.0 does fit the 2024 C. (I figured, but wanted to confirm.)

Carey said that none of their holsters are really designed for the 2024 C and he removed the C reference for the Mach 1. He said the C would require the Mach 2, although it's designed for the P (but that I could put in a special request to have the Mach 2 chopped from the P to the C size). I am going to hold off on that.

That's the one. Don't be put off by what looks like kindergarten craft at the beginning, or the video length ... that video contains more than the half-dozen books I read and likely 50 videos I watched on concealed carry ... Jeff has thought, researched, and experimented with this stuff a lot. It shows in that video, and in his holsters.

I thought the video was very helpful.

As of now, I will probably try the Velo5. The Staccato site also sells the the TXC X1 Pro AIWB (along with a few other brands that are only left hand). Have you heard about the TXC?

I will spend some more time looking at these.

Let us know what you get and what you think ... ditto for leather, which I haven't decided on yet!

I finally shot the C today. Almost did this by meme, so imagine Borat "Very nice!"

 

[Dobermann]

As of now, I will probably try the Velo5. The Staccato site also sells the the TXC X1 Pro AIWB (along with a few other brands that are only left hand). Have you heard about the TXC?

I hadn't seen that one before. Curious as to why only one clip and no claw ...

I finally shot the C today. Almost did this by meme, so imagine Borat "Very nice!"

And now I don't now if I picture you in fishnet baselayers or a mankini ...

But seriously, good score on the C. Let us know more about how it goes.

 

[fwafwow]

I hadn't seen that one before. Curious as to why only one clip and no claw ...


And now I don't now if I picture you in fishnet baselayers or a mankini ...

But seriously, good score on the C. Let us know more about how it goes.

They are not mutually exclusive - fishnets with a mankini.

My shooting today was probably the best I've shot a pistol, which isn't saying much. The RMR HD is now in the mail (literally, USPS - smh).

I used the Mantis for live fire today for the first time. Probably not surprising that the issues to correct dry firing are very different from the issues identified with live fire.

Just pulled the trigger on the Velo5.

 

[kad11]

Anyone have a spare Staccato ST or HD trigger bow lying around they'd be willing to sell? Trigger shoe design doesn't matter, I'm just looking to check fitment in a different platform...

 

[JohnJohnson]

Finally got a day off work and took my Sig P211 to the range for its first shots. I was anticipating a rough break-in and put 400 rounds through it today. Had a FTRB midway through the first mag, another FTRB midway through the second mag, and one last FTRB when dropping the slide on the third mag. After that, it ran without issue to 400 rounds. That was with PMC Bronze 124gr ammo for the first 300 rounds and the last 100 was CCI Blazer 124gr. I witness marked the red dot screws and compensator screw beforehand and neither of them loosened during the session.

All in all it wasn't perfect but for a gun that I paid $0 for it appears to have broken-in well and seems good to go for now. The actual experience of shooting it is very impressive. The compensator works very well and the LOK grip panels I put on it keep my hands anchored through recoil.

 

[RockAndSage]

Finally got a day off work and took my Sig P211 to the range for its first shots. I was anticipating a rough break-in and put 400 rounds through it today. Had a FTRB midway through the first mag, another FTRB midway through the second mag, and one last FTRB when dropping the slide on the third mag. After that, it ran without issue to 400 rounds. That was with PMC Bronze 124gr ammo for the first 300 rounds and the last 100 was CCI Blazer 124gr. I witness marked the red dot screws and compensator screw beforehand and neither of them loosened during the session.

All in all it wasn't perfect but for a gun that I paid $0 for it appears to have broken-in well and seems good to go for now. The actual experience of shooting it is very impressive. The compensator works very well and the LOK grip panels I put on it keep my hands anchored through recoil.

My guy, you tell us you got this for $0, and don't give details on how you made that happen, or provide photos of your 211?

 

[JohnJohnson]

My guy, you tell us you got this for $0, and don't give details on how you made that happen, or provide photos of your 211?

It's just a normal 211-GTO with LOK grip panels and a Vortex Defender XL, not an Infinity or anything. I get the occasional free gun from work. I do appreciate that the optics footprint, while being SIG-LOC, comes with removeable recoil bosses for DPP footprint optics like the XL I have. No adapter plate needed. In general I think the 211 has a lot of upside for its price point. I haven't done anything bold like convert it to a Series 70 with a Wilson Combat shim like I see some people have done.

Side note: Mine came with a metal guide rod plug as did a friend's as well. I guess they made the switch a month or two ago.

 

[RockAndSage]

It's just a normal 211-GTO with LOK grip panels and a Vortex Defender XL, not an Infinity or anything. I get the occasional free gun from work. I do appreciate that the optics footprint, while being SIG-LOC, comes with removeable recoil bosses for DPP footprint optics like the XL I have. No adapter plate needed. In general I think the 211 has a lot of upside for its price point. I haven't done anything bold like convert it to a Series 70 with a Wilson Combat shim like I see some people have done.

Side note: Mine came with a metal guide rod plug as did a friend's as well. I guess they made the switch a month or two ago.

View attachment 1025741

That's a pretty solid work perk right there. Interesting to know they made the switch to metal guide rod plugs. I was actually hoping that Staccato's big surprise release for SHOT this year was going to be a Staccato C that uses Sig 320 mags, like the 211 does. There's an absolute mountain of them out there now.

 

[JohnJohnson]

That's a pretty solid work perk right there. Interesting to know they made the switch to metal guide rod plugs. I was actually hoping that Staccato's big surprise release for SHOT this year was going to be a Staccato C that uses Sig 320 mags, like the 211 does. There's an absolute mountain of them out there now.

The 320 magazines are quite nice. I got the 211 just to try out a 2011 to see what the hype is all about. I definitely get it now.

 

[Yooper]

Anybody have a favorite range holster they're using for a 1911? I've got a commander sized 1911 with an SRO that I'd like to start using more on range time. I was thinking of picking one up from Red Hill Tactical with the QLS mounting pattern but not married to that idea.

 

[RockAndSage]

Anybody have a favorite range holster they're using for a 1911? I've got a commander sized 1911 with an SRO that I'd like to start using more on range time. I was thinking of picking one up from Red Hill Tactical with the QLS mounting pattern but not married to that idea.

It can be a bit of a challenge to find a form-fitted holster for a given gun, when you add in the variables of lights and optics out there, so finding a holster maker that has all the different accessories and base guns to give a lot of options can take some searching. LegacyFirearmsCo has built 3 holsters for me now, molded specific to the guns, lights, and optics, along with personal preference options for mounting and kydex patterns. I've been very satisfied with their work, and the very reasonable prices they ask for it.

 

[Dobermann]

Anybody have a favorite range holster they're using for a 1911? I've got a commander sized 1911 with an SRO that I'd like to start using more on range time. I was thinking of picking one up from Red Hill Tactical with the QLS mounting pattern but not married to that idea.

My post on the prior page has some info on holsters ... and have you used the search function for this thread using 'holster' as the keyword? A few other suggestions on here.

 

[JohnJohnson]

Just because I've never tried silicon carbide out, I'm going to have the factory P211 grip panels done. I have long thin fingers and require a bit more space on grips than most people. The P211 is just big enough around but I'd like to see if the slight added circumference from the silicon carbide makes it even better compared to the LOK grips.

 

[RockAndSage]

Just because I've never tried silicon carbide out, I'm going to have the factory P211 grip panels done. I have long thin fingers and require a bit more space on grips than most people. The P211 is just big enough around but I'd like to see if the slight added circumference from the silicon carbide makes it even better compared to the LOK grips.

I just did a silicon carbide job on the front strap of a Dan Wesson DWX Compact a few weeks ago - it's less of a pain than you'd think. Just tape the area off really carefully, apply a thin layer of 50/50 JB weld, and pour on the grit, tapping it in a bit to seat and shape a little as necessary. Very happy I took the time to figure out how to do it, as there's a few other projects I might try, that I wouldn't have if I'd had to send it off to a smith.

 

[Castle Rock]

Looks great.
If you want something a bit less aggressive paint shops sell grit to put in varnish for stairs that can be used similarly, I use it on laminated rifle stocks.

 

[Castle Rock]

Thanks to those who replied about my post about decent 22s in a 1911, I didn’t get a notification.
Any further info would be appreciated