Search results

  1. XLR

    Tikka folding stock?

    If the idea is to make it cool, boat/car gun and weight are not a major concern, then consider the Aluminum Element 4.0. you can purchase just the chassis block ($375) plus the folding adapter ($145.00) and then purchase if you do not already have a cheap AR buttstock 40-80 and a cheap flat top...
  2. XLR

    Let's see some NRL hunter rifles

    On just the chassis block you can add 3 lbs to a Remington 700 SA Element. That doesn't include adding weights to the buttstock or changing the buttstock to one of our heavier options. Most guys who shoot open light run the Element 4.0 Magnesium with the Carbon grip and carbon buttstock. This...
  3. XLR

    NRL Production setup questions from a n00b

    I would probably go with the 4-32 NX8 or a 5-25 ATACR just to have a little extra magnification. Some conditions like patchy snow make you want a little extra magnification. In Laramie a few weeks ago I shot the entire match on 20-25 power. Vernal was dry but there were some small targets so I...
  4. XLR

    Tikka 6.5 Creed rechambered to PRC

    I would go with option #3 and just get a new barrel. Although this is the most expensive option a good cut rifle barrel will be super accurate! You could also sell the factory barrel and recoup some money that way.
  5. XLR

    Xlr element

    If you purchase the buttstock and grip with the chassis block, we will assemble it. The only things we normally do not install are accessories (excluding folding adapter), so you can install them wherever you want. Every chassis ordered will have included action screws and instructions.
  6. XLR

    XLR Element vs KRG Whiskey-3 for Hunting chassis?

    The Element 4.0 MG with the carbon buttstock, ergo grip, and folder would be 35oz, 33 oz with the carbon grip (2 lbs 1 oz). So it would be a 2 lb difference between the two chassis. * Correction this is the weight for a 700 chassis. The weight varies by inlet. For a tikka chassis with carbon...
  7. XLR

    Bartlein or benchmark cfw barrel

    Both of them make awesome barrels!
  8. XLR

    Using my XLR Tikka LA for my 6.5CM

    Phil hit it right on the head with the above answer!
  9. XLR

    Using my XLR Tikka LA for my 6.5CM

    You will need to swap over the bolt stop and get a 3.560" 3006 magazine. Running 6.5 in that mag might require some tuning but guys one here have had good luck! Let us know if you have any questions.
  10. XLR

    WTS XLR Industries DBM (original)

    This will also fit on a 700 SA or 700 LA chassis.
  11. XLR

    XLR Chassis Hardware Poll

    Maybe its something that we look at after this survey is done. At this time though we are only looking at the options listed above.
  12. XLR

    XLR Chassis Hardware Poll

    We want your opinion! Fill out this survey and let us know which hardware material you would prefer!
  13. XLR

    100% Carbon fiber stocks: very lightweight and rigid but are they durable?

    I cant speak for stocks but our Smoke carbon buttstock comes in at 11 oz (with the cheek rest) and 5 oz without the cheek rest. I haven't had a single one returned due to damage or breaking. I have seen a couple of recoil pad screws strip out when guys are installing LOP adapters but nothing...
  14. XLR

    A Newbies Positive NRLHunter Experience in Detail

    Great write up and it was great shooting with you man! Posts like this are going to encourage more guys to get out there and improve their shooting skills!
  15. XLR

    110 ultralite XLR element build

    Looks like it turned out awesome man! Thanks for sharing!
  16. XLR

    Medium Actions for hunting

    The new trigger guard is our solution for that! https://xlrindustries.com/products/hunter-dbm-upgrade
  17. XLR

    Chassis Buttstock Alternatives

    Something to confirm when you are looking for a buttstock we don't sell is the actual length of the buttstock. This will allow you to confirm the LOP is correct for you. Our two carbon buttstock lengths (actual lengths) are listed below for reference. Carbon 12.5" Actual length-...
  18. XLR

    Wolf precision

    I dont own one of his builds but Jamie is always awesome to work with on our end and he seems like he would be great to work with on a build!
  19. XLR

    Tikka / XLR 7mm PRC Magazine question

    The chassis pages are down right now because of our web host running some updates that basically made our custom coding not work. We are currently working on getting the website back up and running! The longer Tikka magazine would be awesome! At this time its not something we are working on...
  20. XLR

    Bergara MgMicro Lite- Thoughts?

    On the chassis side, customers who prefer the ATOM are guys who are shooting mainly off tripods and they don't need the longer forend. The shorter barrel of the Micro lite will make the rifle nice and compact for your backpack hunts too! We have a ton of customers running the ATOM on anything...

Latest posts

Featured Video

Stats

Threads
361,581
Messages
3,826,615
Members
82,229
Latest member
Robjbrown42

Latest Articles

Top