Search results

  1. T

    WTS Remington 700 BDL 7RM

    TTT
  2. T

    Rokslide Community "Fat no mo'" 2023

    I’m gonna get in on this. 34, 5’9 and 225 on the 1st. Getting married and having two kids while getting a college degree, I packed in quite a bit of weight. My goal is 180lbs. So far I’ve been loosely tracking macros on MyFitnessPal and working out on my days off. Workouts are either...
  3. T

    G20 loading

    I’m going to use starling brass and it uses large primers. I ended up ordering some CCI 350’s(large pistol magnum) because it’s what I could find in stock. If your going to reload the brass you have you should be able to use any small pistol primer.
  4. T

    threading a 7mm tikka sporter barrel

    My 300wsm is threaded 1/2x28 for an apa microbastard. I didn’t take any length off the barrel.
  5. T

    Heirloom Hunting Gear

    I didn’t come from a hunting or gun family but my wife did. We’ve bought 2011’s that will be handed down to each of our kids. I also have a Remington 1100 that is currently ~40 years old that will be my daughters. My FIL is refinishing a browning A5 from the 1930’s IIRC that will be handed...
  6. T

    WTS Remington 700 BDL 7RM

    This is an adl converted to bdl with hs precision stock, bottom metal and timney trigger. The gun does have some extraction issues, it will not reliably pull fired cartridge out of chamber. I haven’t shot it in ~5 years now, but the last thing I tried was replacing the extractor and that...
  7. T

    G20 loading

    I ordered the .401. I’ve never had to specify diameter before. How will I know if I need to go up in size? I’m guessing stability issues, keyholing? Thanks for the info.
  8. T

    First overnight hunt with my daughter

    Was a success! My daughter just turned four. She’s been on a couple day hunts with me but this is the first overnighter. Got camp set up yesterday just after noon. Evening hike and squirrel hunt. She had lots of fun walking in the woods looking for squirrels. Back at camp we reheated...
  9. T

    G20 loading

    Thanks for the info. Ended up buying the gun today and ordered the brass, bullets and picked up some #9 at y'all's recommendation. Gonna have a hang up in the primer department. I thought I had some large pistol primers but I must have shot through all of them.
  10. T

    which resizing die type?

    I run standard redding dies for all my bolt action rifles. My next set will probably be a bushing set though.
  11. T

    G20 loading

    I’m thinking about picking up gen 4 G20 this week. I have dies, primers, powder, and ready to place an order on brass. Trying to decide on a bullet. Currently looking at the Montana bullet works 200gr WFN. Looking for experience with these or similar bullets, primarily if there are any...
  12. T

    Threading a .30 cal Tikka t3x superlite or lite

    My t3x in 300wsm is factory length and threaded 1/2x28. Have an APA micro bastard on it with no issues.
  13. T

    Painless load development (mine)

    This and the recent Hornady podcast could have saved me a lot of time and money over the years. I couldn’t say how many times I’ve done the usual load development, found a three shot group that looked good, loaded a few more and had it open up was left scratching my head wondering where I went...
  14. T

    300 WSM Load Development

    Keeping this thread alive. I haven’t hunted or shot much in the last 2 years but finally got around today to test some loads I made last year for my Tikka. 180gr accubonds, H4831, Fed 215 and new Nosler brass. These are all compressed loads, loaded to factory mag length. I loaded 3 rounds at...
  15. T

    Tikka and NF SHV mount question

    I just mounted up a 4-14x56 with Warne rings on my Tikka last night. Haven’t shot with it yet but the Warne rings I have on my other rifles are solid.
  16. T

    Tikka help

    Thank y’all for the help!
  17. T

    Tikka help

    Yes, t3x. The Warne rings I’m using don’t utilize the holes in the receiver top, the previous leupold ones did, which is why they were removed. That’s helpful to know that there weren’t actual screws there to begin with. Maybe I can track some of those down and put them in after I get the...
  18. T

    Tikka help

    Nightforce SHV and Warne rings came in today. The original rings on the gun were put on by the shop I purchased it at. Removed old rings and found that I’m going to need the original screws that were in the receiver top(pic below), but can’t find what size they are. Help would be much...
  19. T

    Cots, again.

    I bought a couple cots last year to use in my tipi. I don’t have experience with that one, but I did consider the cabelas one your talking about. I ended up going with this: https://www.academy.com/shop/pdp/magellan-outdoors-ultra-compact-cot?sku=black Only slept on it a few nights last...
  20. T

    6.5 creedmoor Barnes lrx in stock

    https://www.natchezss.com/barnes-vor-tx-long-range-rifle-ammunition-6-5-creedmoor-127-gr-lrx-bt-20-ct.html At a normal-ish price. This stuff shoots great in my Ruger American.

Latest posts

Featured Video

Stats

Threads
360,182
Messages
3,808,858
Members
81,946
Latest member
GramHamHam

Latest Articles

Top