I forgot to insert obligatory Dr. Ashby links. Here's a good archive of it: http://tuffhead.com/education/ashby.html
Read it. All of it. All the calcs and napkin math and theorycrafting pale in comparison to empirical testing and field data. It's all done with a trad-bow, so it'll scale up...
I use mine in the snow. Search youtube for SL5 in the wind and snow - lots of videos out showing them in high-winds with and without snow. I don't know that I'd want to be in one over 50mph, but I haven't tried it either.
I'd only be really worried about a massive wet Sierra dump, since your...
If you have the spare cash, got for the upgrade because it won't hurt.
But.
At 60 yards, the flight time difference is negligible.
At 60 yards, the KE is bleeding off really quickly and doesn't really matter.
At 60 yards you need a heavy arrow to, as larryschwartz says, KEEP your momentum...
I left a sleeping bag at the upper campground of Iron Lakes back on September 22nd while packing up in the dark.
It's a long-shot, but stranger things have happened and I really liked that bag. =)
Thanks!
-mox
Santa Clara County Search and Rescue
I just built arrows targeting 80lb draw weight with a 32" draw length, using 30" shafts + HIT inserts and using a Ripcord Red drop-away rest.
With HIT inserts the setup works with not much room to spare.
With the outserts on the outside, it will conflict just a little with the dropaway rest at...
Steripen's major selling point is the anti-virus capabilities. Therefore it is their (MSR's) largest competition. To just say "total failure" and move on means that anyone not paying attention or doesn't know how it actually works is a win for them.
The Steripen test was bogus.
Why?
Because Steripen/UV DOES NOT HAVE TO KILL STUFF. It can still be alive when you're done. Read that again. Yes, you can drink it with the bacteria/viruses still alive.
However.
For a bacteria/virus to harm you it has to replicate. It has to reproduce into...
Yeah, if I was shooting less weight or had less draw length (shorter arrow) then getting into the low 500s with good FOC would be doable.
When the base arrow-shaft weight is 348gr all by itself there's just no option to really build up the FOC without pushing the total weight way up.
I'll...
You are correct - I got my thermal-capacity (how hard it is to heat) and thermal-conductivity (how well it transmits heat) intermixed in my post.
Apologies.
Density of the brass you listed is ~ x2 that of the Alum, 3x that of the Ti.
I don't know how much the lead in the brass will cause...
Looks like it's considerably heavier, more prone to denting/bending, and has *much* worse thermal conductivity (like, much worse ... Ti-t6 has 46.5 BTU-in/hr-ft^2 vs cartridge brass' 833 BTU-in/hr-ft^2.)
Oh, and brass often contains lead - make sure you get the pure stuff or it might not be fun...
Yep, they're based on the GT .200s! The BERs (.150) and GrizzlyStiks (.175) were all too heavy on the gpi to get good FOC without really going overboard on weight.
I was going to run the SS BER .150 half-outs for 76gr up front and the extra touch of length since the Kaos only have 30" out of...
I'm not getting wrapped up in speed - actually just the opposite! I'm trying to decide if I want to roll with 200-240 FPS and how much I want to deal with the extra drop at longer ranges.
Theoretical from online calcs and specs...
571@296, 12.54 FOC
737@234, 20.02 FOC <-- What'd you shoot...
So I finally ordered a new bow, one that actually fits me since I'm a big guy. My old too-short Golden Eagle from 1996 is finally retired.
My old arrows were already underspined (5575 .400s) with the GE so I need to build some new ones to fit the new rig.
Western hunting, spot and stalk...
Every place is dead-out. I called Larry but got an answering machine - left a message but no callback. Had a SAR callout so I had to cancel the hunting trip anyways. (Didn't find the guy but had a nice mountain-hike loaded down with gear ... ) Went to go get some TAG bags today and the...
On a last minute hunt and trying to find a T.A.G BOMB bag set. Everyplace I see is out of stock.
Anyone know smaller shops who might have one left?
Thanks!
-mox
re: fitting
Here's another fitting one. It's by Eberlestock but it's appropriate because Steve is in it. :P
https://youtu.be/KDbDXRUXFnA
Or this one for a Kifaru.
http://www.militarymorons.com/equipment/kifaru/kifaru_setup.html
Hopefully we'll see an Exo-specific video. It shouldn't be...