Search results

  1. Lentuk

    Does Loctite alter torque on scope rings

    journeyman713 Sounds like you work for Warne to me....
  2. Lentuk

    Does Loctite alter torque on scope rings

    ^ That is what I think also. The 30mm rings were mounted on another trijicon, the rear ring was close to the power adjustment ring, when I torqued them to 15 inch pounds they locked up the adjustment ring, the TPS ones did not.
  3. Lentuk

    Does Loctite alter torque on scope rings

    Already sent the scope and rings back to Warne. They are going to look at it. This is really more about the loctite, they are claiming it was the culprit.
  4. Lentuk

    Does Loctite alter torque on scope rings

    The 30mm ones are small also, these are old TPS 30mm rings compared to the Hyperlites.
  5. Lentuk

    Does Loctite alter torque on scope rings

    Brand new Warne USA made Hyperlite rings and a Wheeler fat max torque wrench that I have used dozen of times with no other problems. I just talked to Trijicon, they rate their scope tubes at 18 inch pounds. Even if the Fat Max is off 5 inch pounds it should not have dented the tube, something is...
  6. Lentuk

    Does Loctite alter torque on scope rings

    I have been told by Warne customer service that using blue loctite on my scope rings caused over torquing and is the reason the Warne Hyperlite rings damaged my Trijucon Accupoint. I used a Wheeler fat wrench set at 15 inch pounds and this is the result.
  7. Lentuk

    Warne HyperLite Picatinny

    So I heard back from Warne via Midway customer service, they are where I bought the rings. Randy says the blue loctite I used is possible the reason?? Nov 7, 2024, 8:19 AM PST Randy Parks (Warne Scope Mounts)...
  8. Lentuk

    Warne HyperLite Picatinny

    I bought two sets, 1 inch lows and 30mm lows. I would not recommend them. I had two old sets of TPS rings and wanted to try something lighter. The one inch rings crimped the tube on my Trijicon Accupoint 3-9x40 @15 inch pounds. When I did the same with the Warne Hyperlite 30mm rings on my...
  9. Lentuk

    Ultralight Ultralight Rifles

    Still waiting for a carbon fiber hand guard but I want to shoot it so here it is for now. Dont know if I have the skills to hold this steady without some kind of rest..
  10. Lentuk

    Testing: Bergara MG Micro Lite

    Here is mine in .308, Hawkins featherweight rings and a Trijicon Creedo HX 2.5-15x42.
  11. Lentuk

    Tikka "Rokslide Special", let's see 'em

    None with the CTR stock and bottom metal, two action screws. Depending on caliber you need the magazines, the .308 CTR mags will work with 6.5 CM, 6 CM .243, and similar, .223 mags have an insert for the smaller round but have the same body.
  12. Lentuk

    Tikka "Rokslide Special", let's see 'em

    Dont know if this is a RSS but I like it, I wanted a .223 CTR but could not find one, bought the stock, stainless CTR rail, bottom metal and two mags on ebay then used my .223 Superlight to build a CTR light.
  13. Lentuk

    Tikka "Rokslide Special", let's see 'em

    I am using this on several rifles now, very happy with it, its a little over 13 ounces. https://www.trijicon.com/products/details/tr20-2g
  14. Lentuk

    WTS Solo 300 upper and Shaw portless barrel

    Keeping
  15. Lentuk

    Ultralight Ultralight Rifles

    My Shaw came in today, just waiting on two more parts.
  16. Lentuk

    .223 for bear, mountain goat, deer, elk, and moose.

    77 Grain TMK in stock at Midsouth
  17. Lentuk

    Ultralight Ultralight Rifles

    This is my go to, Midway has them in stock. https://midwestindustriesinc.com/upper-receiver-rod/ https://www.midwayusa.com/product/1023112335?pid=474217
  18. Lentuk

    Ultralight Ultralight Rifles

    I have been messaging Shaw barrels via Instagram for about a month. The .223 Wylde barrels are ready, looks like about 20 or so in the box, mine is on the way.
  19. Lentuk

    Ultralight Ultralight Rifles

    I bought mine directly from Hogue https://www.hogueinc.com/ar-15-m16-15-degree-vertical-polymer-grip-black
  20. Lentuk

    Ultralight Ultralight Rifles

    @Thegman I am almost done with my build but still need a barrel. I am having a hard time choosing between the .223 and the .300 Ham'r. I would be using this rifle for elk and deer mostly in Montana and Arizona. Hate to put you on the spot but if you could only choose one...

Latest posts

Featured Video

Stats

Threads
349,629
Messages
3,683,218
Members
79,986
Latest member
Fishtaco13

Latest Articles

Top