Search results

  1. D

    Hamskea HH Pro rest noise

    The metal on metal contact you are hearing is when the carrier rod rotates into the stop screws. If it is hitting so hard that it is really loud, I would move the activation cord a little ways down the limb. You want the cord to be tight when the bow is at rest and completely slack when you...
  2. D

    Hamskea trinity hunter pro

    The felt is included in the package for archers who are concerned about any wear they might experience over time with the overmold. The overmold is much quieter than a standard steel launcher, but it does wear down a little over time. I prefer to use just the standard overmold launcher without...
  3. D

    Uphill left misses downhill right misses

    Here is a video that explains what you are running into and why 3rd axis is so important. Hamskea Sight Leveling- The Why
  4. D

    H4831sc 7mm Rem Mag

    I have had great success with H4831sc in my 7 Rem Mag shooting the 165gr Sierra Gamechangers. I'm loading them 0.035 off the lands with a charge of 67.4gr of H4831sc and Federal 215 primers. I found this combo produces .5MOA groups with velocity about 3020fps out of a 26" barrel. I use this...
  5. D

    Hamskea rest

    The spring is definitely recommended and has a few benefits. 1. Eliminates any launcher flutter to prevent fletching contact. 2. Eliminates most of the shock transferred from the limb. This reduces wear on the internal components.
  6. D

    IMR 8133 or 7977 in 7 Rem Mag

    I have been using H4831SC in my 7 mag with great results. There always seems to be some on the shelf and it is a versatile powder.
  7. D

    7mm hand load.

    I have been working on loads for the 165 Sierra Gamechanger (tipped gameking) with 65-68gr of H4831 and have been really impressed. It was easy to get a consistent load that shot great out of my gun. I've had pretty good luck with H4831 out of my 7RM and 300WM for accuracy and it is a lot...
  8. D

    Hamskea hybrid noise?

    The factory stop screw is an 8-32 x 7/16. So if you can find a 8-32 x 1/2, just adjust the effective length with a couple washers under it.
  9. D

    Let’s see your method for tying in a peep

    Here are some instructions on how I tie my peeps. It takes a little longer to do, but they peep doesn't budge after it's tied in place. Hamskea Peep Tie In Method
  10. D

    Hamskea Raptor Peep - 1/4" or 3/16"

    The 3/16" Raptor is by far the most popular.
  11. D

    Hamskea Trinity Pro fit on Halon 5?

    The Trinity and Hybrid have the same basic dimensions, but Hamskea does have a replacement riser bar that will allow the rest to move closer to the riser and fit. Just give the office a call 970-978-8490.
View older results

Latest posts

Featured Video

Stats

Threads
349,304
Messages
3,679,070
Members
79,909
Latest member
Rizzo

Latest Articles

Top