Search results

  1. jonboatjockey

    WTB 223 bolt gun

    TTT Would be interested in a Howa Mini in .223 as well!
  2. jonboatjockey

    WTB 223 bolt gun

    TTT
  3. jonboatjockey

    WTB 223 bolt gun

    Anyone have a 223/5.56 bolt gun they want to part with, looking to either an Mossberg MVP or 22" or less barreled Rem700 or tikka. I would also entertain Rem 700 actions with 223 bolt faces or barreled actions in 223.
  4. jonboatjockey

    WTS New SIG M400 5.56 BCG $100 TYD

    Do you know if these fit all Mil-Spec uppers?
  5. jonboatjockey

    WTS Fail Zero AR15 Nickel Boron BCG

    Still got it by chance?
  6. jonboatjockey

    WTB .223 wylde

    Price?
  7. jonboatjockey

    WTB .223 wylde

    TTT
  8. jonboatjockey

    6.5x284 off 308 action?

    I have two 6.5X284’s, one custom and one savage. Both long actions, and wouldn’t have it any other way. Short actions do not allow for the cartridge to really shine due to bullet seating depth/mag box issues. I’m not really familiar with the weatherby’s but If you can open up the bolt face to a...
  9. jonboatjockey

    WTB .223 wylde

    Anyone have a 223 wylde complete upper taking up space they would like to unload before I buy a new one? Looking for 16"-18" upper with or w/o BCG CH, functional is a must, cosmetics (scratches etc...) not super important. Thanks!
  10. jonboatjockey

    M16 Extractor in Rem 700 action

    Nope, not at all. I figured i was going to be on the hook for getting it re headspaced
  11. jonboatjockey

    M16 Extractor in Rem 700 action

    I called AREA419 and they sent a label out for me to send the barreled action to them so they can sort out the problem! Shipped it out yesterday and we'll have to see what they come up with.
  12. jonboatjockey

    M16 Extractor in Rem 700 action

    Using my Sinclair shoulder bump insert on my comparator is how I arrived at these measurements. So they are all relative, but I think the go gauge is 1.80 for the .284 correct and no go should be 1.815?
  13. jonboatjockey

    M16 Extractor in Rem 700 action

    Same SN on the bolt. First thing I checked
  14. jonboatjockey

    M16 Extractor in Rem 700 action

    I measured a piece of worked brass at the shoulder from before and got 1.790. I measured a piece from the other day after the m16 and got 1.810. .020 difference. I guessing there is where my problem could be
  15. jonboatjockey

    6.5x284 hunters

    I was getting around 2900 with RL26. Gun is out of commission for a little bit for a bolt problem unrelated to the loads. I got an m16 extractor installed and getting crazy pressure with my old mild loads
  16. jonboatjockey

    M16 Extractor in Rem 700 action

    I was doing RL26/156 Berger load work up the week before I sent it in, the weather turned cold and I was going to be busy at work for a month or so so I sent it in. I doubt its a cleaning issue. Maybe it is something simple, I am by far not a pro, but give me a little credit here. This gun is...
  17. jonboatjockey

    M16 Extractor in Rem 700 action

    With having three firings on the brass at one dimension, then adding .004-.005 headspace could be causing some issues too I would imagine. I shouldn’t have severe primer flattening pressure with loads that prior to having the extractor put in were mild.
  18. jonboatjockey

    M16 Extractor in Rem 700 action

    3 loadings on the Lapua Brass. If it was a counterbore issue wouldn't i have issues closing the bolt?
  19. jonboatjockey

    WTT Retumbo for RL26

    TTT
  20. jonboatjockey

    M16 Extractor in Rem 700 action

    I'll give them a call on Monday and see if they have any suggestions.

Latest posts

Featured Video

Stats

Threads
349,237
Messages
3,678,444
Members
79,892
Latest member
TheWoat

Latest Articles

Top