Search results

  1. B_Reynolds_AK

    Silencerco Scythe TI review

    So after 1200 rds or so, my Scythe weighs 9.1 oz. Anyone clean one of these yet? Any tips?
  2. B_Reynolds_AK

    Rugged Alaskan 360 TI

    Direct mount, no reflex.
  3. B_Reynolds_AK

    Rugged Alaskan 360 TI

    10.1 oz on my digital scale.
  4. B_Reynolds_AK

    RokStok

    Fancy wood? Were you able to discuss any options, upgrades, rails etc?
  5. B_Reynolds_AK

    RokStok

    Did you commit to a wood Rokstok?
  6. B_Reynolds_AK

    Saw recommendations

    I find the Silky F180 is a fantastic saw that cuts extremely well and weighs 5.3 oz. The 7” blade is long enough to be useful on fairly large diameter trees. I always carry one on my snowmachine. But, like what’s been mentioned, this large tooth blade is for wood, rather than skull capping. For...
  7. B_Reynolds_AK

    Cook pot comparison

    I’ve used other pressure regulated stoves such as the Soto Windmaster. Any increased efficiency over my BRS/Fire Maple heat exchanger pot combo is very minimal. Our “high elevation” isn’t really that high compared to a mountaineering objective on a 6,000 meter + peak. Cold is the real issue...
  8. B_Reynolds_AK

    Stupid Light?

    I don’t know if anyone should listen to this FNG here with only 11 posts.. JK 🤣 Welcome to the ‘Slide Allen! If anyone doesn’t know, Allen is a wealth of knowledge and a straight killer. @shwacker I believe that once you have enough experience in the environments you are hunting in, that you...
  9. B_Reynolds_AK

    Which action to buy

    Perhaps on a clean, dry action. However get the action wet and dirty, like on a true backcountry hunt, and then try and run the AnTi fast, especially with a little sideways pressure, like could be introduced from being in a field position. The bolt bind is very real in that situation.
  10. B_Reynolds_AK

    Sold 338 Federal Barrel - 16” PBB, Defiance Anti Prefit

    $575
  11. B_Reynolds_AK

    Which action to buy

    No comparison in smoothness of the bolt on a Tikka vs a Defiance, less debris entering the chamber with a solid bolt vs a heavily fluted one and the reliability of the Tikka in field conditions. Action cuts by Unknown lighten the Tikka up several ounces and a full Nitride to protect from the...
  12. B_Reynolds_AK

    Which action to buy

    Yes. Tikka. A budget custom REM 700 clone will not make you happy. My $1800 AnTi X action is going down the road in favor of a custom built on a Tikka action.
  13. B_Reynolds_AK

    Cheek Risers - Recommendations

    I second the Beartooth sleeve/riser. I just put one on my Fieldcraft. I used a grinding wheel to shape the foam that came with it and put in a nice negative comb. Edit to add: It’s a tight fit. Hold onto your gun tight when installing. Dropped the gun on top of my bare foot and may have broken...
  14. B_Reynolds_AK

    The Shoot2hunt Podcast

    Why did I hear Joseph Von Benedict’s voice when I read that 🤷🏻‍♂️😅
  15. B_Reynolds_AK

    Tikka Nitriding

    I think so. Also it keeps the action sealed up more from debris entering. My Anti X gets all kinds of crap in the chamber when I’m bushwhacking through alders.
  16. B_Reynolds_AK

    Tikka Nitriding

    Or you could do what I requested from them to ensure that it does run smooth, which is full nitride with action cuts, but leaving the bolt alone. No fluting.
  17. B_Reynolds_AK

    The Shoot2hunt Podcast

    1 moose, 2 blacktail. 90 yards to 525. Great performance on all. I have heard mixed results on other calibers of the MB's, but my limited use of the 112's is positive. You wouldn't go wrong with the 109's though.
  18. B_Reynolds_AK

    The Shoot2hunt Podcast

    Patriot Valley Arms. AnTi X prefit. .750 contour, 7 twist, 18"
  19. B_Reynolds_AK

    The Shoot2hunt Podcast

    1:7 Eh, They were getting a bit loose after a few firings when I was loading hotter. Seem fine now that I'm at 41.8g of H4350.
  20. B_Reynolds_AK

    The Shoot2hunt Podcast

    I've backed down a bit on my load to 2920 fps with the 112 MB's out of the 18", using H4350, which is the load I killed the moose with. I believe my friend with the 16" is in the high 2900's with the 109's and a warm load of the same powder. My 18" is a bit under 2900 with factory 108 ELD-M's.

Latest posts

Featured Video

Stats

Threads
348,963
Messages
3,674,787
Members
79,825
Latest member
michiganmoron

Latest Articles

Top