Search results
-
Broadhead Retuning
Also, please don’t ever shoot a bareshaft with a fixed blade! Sent from my iPhone using Tapatalk -
Broadhead Retuning
You’re reading into incorrectly. It’s stating that if you have a right tear with a fletched shaft you will have a bareshaft that impacts to the left and so will your broadheads. I hate this argument because there is so much misinformation out there I’m just gonna leave it at this, if your fix... -
Broadhead Retuning
As said before, if your fixed blades are impacting left of field points, you need to bump rest to the left or add half twist at a time to your right yoke(s) or shimming cams to the right. But as also mentioned, sometimes you need to check yourself. Sent from my iPhone using Tapatalk -
Broadhead Tuning
No, you don’t need to have them group together but that’s what you definitely should strive for. I haven’t seen the video you mentioned, but I’m sure what he’s referring to is compensation. You have achieved tuning bliss when your field points and bareshafts have the same point of impact at... -
Kuiu Frame Noise - but not the usual?
That’s correct. The smaller bags don’t have the pockets so you run the load lifter straps thru the slots. Could you possibly post a pic of the setup by the load lifters? Might be able to help you with this. Sent from my iPhone using Tapatalk -
Collar fit on Daysix arrows?
Not trying to argue, but where do they state that they’re intended to be glued on. I really don’t know, I have never use the day six but currently use the ethics and I don’t glue the collar and the shaft did require sanding for fit up. Sent from my iPhone using Tapatalk -
Collar fit on Daysix arrows?
Correct answer Sent from my iPhone using Tapatalk -
Collar fit on Daysix arrows?
They should be a tight fit around the shaft. Like another poster said, it’s losing some structural integrity if there’s play Sent from my iPhone using Tapatalk -
Kuiu pack frame sizing
Go with the tall. I’m 5-10 and got the medium and couldn’t get the frame to go high enough for my liking. Sent it back and got the tall, much better. You also have about 4” of adjustment so you’d be better off to go with the taller frame. Easier to make a taller frame shorter than it is to make... -
Broadhead Tuning Question
That oscillation is what is causing the initial reaction. It’s what’s happening to the arrow after it leaves the bow that affects POI. Again, perfectly tuned bow, bareshafts hitting with fletched, now you bump the rest to the right (right hand shooter) and it’s now out of tune. This is going to... -
Broadhead Tuning Question
Read through post 52, there’s a rough analogy in there that might help make more sense of this. Take a 10’ piece of 1” pvc (shaft), hold it by one end and try pushing a 10lb bowling ball (point weight) around with the other end, especially applying a fast sudden force, both ends will stay in... -
Broadhead Tuning Question
That’s very true what you’re saying. You can only tune to your shooting ability. The same applies to sighting in too Sent from my iPhone using Tapatalk -
Broadhead Tuning Question
Incorrect I know it seems like if your rest is to far right that you should get a nock left tear, but that’s just not the case. That would result in a nock right tear. Again, read post 52 and try to draw a conclusion from that. Sent from my iPhone using Tapatalk -
Broadhead Tuning Question
Read through my last post #52 and hopefully it will make more sense. Sent from my iPhone using Tapatalk -
Broadhead Tuning Question
I know it’s confusing, everything about tuning a bow seems counterintuitive. So let’s say your bow is tuned to perfection and you bump your rest to the right (right hand archer) You will now have a nock right condition, even though you point is pointing to the right. I’ll attempt to explain... -
Broadhead Tuning Question
Well, what you just described is going to be opposite of what you said. If your bow is tuned as you said and you bump the rest to the right so the point is now pointing to the right. You now have a nock right condition, your broadhead will impact to the left of your fletched, your bareshafts... -
Kuiu Icon Pro Pack help....
Not sure why, but I’m not able to view the attachments. Can you load the pictures another way? Curious to see what’s up with your setup. Sent from my iPhone using Tapatalk -
Kuiu Icon Pro Pack help....
When you tension this strap, it will pull the bag down as tight as you need it onto the frame stays. Sent from my iPhone using Tapatalk -
Kuiu Icon Pro Pack help....
Ignore the male buckle, that’s for my icon pro bag. I currently have it setup with an 1800 ultra bag, anyway, You can see how the strap comes off the hip belt and goes up to clip to a loop on the bag, the strap then comes back down thru a closed loop and compressed around the bottom of the bag... -
Kuiu Icon Pro Pack help....
There should be 2 straps at the bottom of the lumbar pad on the back that hook onto the bag. Sent from my iPhone using Tapatalk
Featured Video
Stats
Latest Articles
-
WE WON!
-
Mule Deer Rut Update & Buck Story
-
Sitka Gear HyperDown Sleeping Bag Review
-
TT#42 Mark Denham with Outdoorsmans history and innovations.
-
Kryptek Traverse Merino Review
-
First Lite 308 Pant Review
-
Argali Selway 6P Tent Review
-
AGC Kobuk 2800 Backpack Review
-
Hunting The Leaf-off Window
-
TT#41 Jordan Budd’s Tips on Finding and Killing the Big One