Search results

  1. S

    T3x Lite vs lightened CTR?

    I own both. My Lite is set up strictly for low light, so weight isn't my concern. It's topped with a Schmidt Bender Polar. My CTR wad put on a diet. Put it in a T3x stock, same bottom metal and mags. Also pulled off rail and use UM rings. It's topped with Trijicon Credo Hx. The CTR as it sits is...
  2. S

    HCA carbon vs Carbon Six Tikka Prefit

    Buddy has a carbon six 7 saum 20" and loves it. Drives tacks with 160 accubonds. He's currently loading some 168 berger to test.
  3. S

    Tikka compact w/ 20 inch barrel - velocity loss

    Not 6.5, but my Tikka T3 308 shoots handload 155 scenars at 2860 and my T3x CTR 20" shoots them at 2842, so I lost 20 fps at 2" or so of barrel.
  4. S

    Trijicon Credo HX Reticle

    I agree totally with the illumination. I wish it was just the center dot rather than the whole reticle. The reticle is rather thin to use in thick hardwoods, but is still very nice. I have a different opinion on the glass though. To my 51 year old eyes, the glass is very nice. I have SB's...
  5. S

    CTR Stock on Standard T3X

    Pulled the heavier Arken and installed a trijicon credo hx. Also pulled the rail and installed UM tikka rings. Now it just like a short barrel heavier contour tikka t3. And it's only .76 lb heavier than my T3 lite in 308.
  6. S

    CTR Stock on Standard T3X

    Yes. But the Ridgeline stock had a larger barrel channel than a t3 lite or t3x superlite. Just means that you will have to remove a little more material than I did to get it to fit. Other than the OEM bottom metal and mag, you will need the mag spring clip which could be purchased separately...
  7. S

    Trijicon

    Few in stock here in Louisiana https://www.sportoptics.com/trijicon-accupoint-3-9.html
  8. S

    OFFICIAL Peterson Cartridge Customer Support Thread

    So not making these anymore? https://www.submoashooting.com/peterson-7mm-remington-mag-long-brass-50-count-new/
  9. S

    OFFICIAL Peterson Cartridge Customer Support Thread

    I had seen that you offer 300 WM in the "Long" version. I had briefly seen 7mm rem mag in the same "Long" version. Do you still offer the 7mm Rem mag "Long" version?
  10. S

    Any reason for TO84 over UM Tikka rings? (Apart from cost)

    - Sportsmatch has a recoil pin in one ring in order to help from shifting. - UM rings have pin in both the front and back and are movable. Meaning the ring placement give you more options being the recoil pin is separate from the rings. - UM rings utilize bigger screws, thus allowing more...
  11. S

    TIKKA CTR on a diet

    Mine is a Tikka ridgeline takeoff stock that I silghtly opened the barrel channel some. Use standard T3x bottom metal and mag. As others have said, it will leave a gap on the original CTR stock.
  12. S

    TIKKA CTR on a diet

    I posted earlier. Since have taken the Arken off and replaced with a trijicon credo. Also pulled thr rail and put UM rings. Like it is, it weighs .74 lbs less than my T3 lite with the 56mm Polar. Like it alot.
  13. S

    Tikka CTR Rail removal

    Like I mentioned earlier in this post, acetone!!! Pull barreled action out of the stock. You can remove the bolt as well. Take a rag and soak it with acetone. Drape the rag over the action so that the acetone will sit on the epoxy a while. This allows it to somewhat soak in. I then took a...
  14. S

    Best 4-16 rifle scope for 1k or less

    Mine rides in the gun rack on my polaris ranger going down our trail to my property. It is by no means a hwy and is bumpy as hell. Im sure the gun, being the rack is rigid mounted, takes a shaking pretty good every time I go down it. Now, I don't throw out my deer stand like some just to...
  15. S

    Best 4-16 rifle scope for 1k or less

    Not bad at all. I had to go med UM tikka rings due to the ctr barrel contour. Lows may clear with the t3x lite or superlite, but can't confirm.
  16. S

    Best 4-16 rifle scope for 1k or less

    Yep as others said, 4-16x50 trijicon credo, mine has red MOA reticle.
  17. S

    Can not find federal 7mm RM brass

    I was in your same boat right before hunting season. I was looking at Peterson, and the reason I was looking at peterson was that they offered a 300wm Long version and normal 300WM brass. The long was a longer case, not much, maybe .015" but what it did was help out with head case seperation...
  18. S

    Reloading components

    I havent seen fed 210 m primers in well over a year. This me swapping my load to CCI-200's because they pop up from time to time.
  19. S

    Tikka T3x Superlite 308 win with Vortex Viper HS 4-16x50 - Which Rings?

    check sportoptic. Here in Louisiana
  20. S

    Accupoint or s&b

    I had a custom rifle built on a Rem 700 a while back that had my Klassik 2.5-10x56 on it. It had capped turrets. Just to give you an idea of what they look like. It did have illumination thus the knob on the left of optic.
View older results

Latest posts

Featured Video

Stats

Threads
341,609
Messages
3,594,513
Members
78,502
Latest member
KarlCutter

Latest Articles

Top