Yet another Fierce Firearms Issue...2024

Pistol58

FNG
Joined
Oct 14, 2022
Messages
16
Well, add me to the list of unhappy customers. I went against my better judgement and took a shot on them.

I purchased a Rogue 7mm PRC with a 20" carbon barrel back in Feb of this year. I wanted something lightweight and short (to add suppressor) that I could take on hunts out west. At the same time I ordered a dedicated suppressor.

The rifle sat in my safe for months while I waited on the suppressor to clear. My thought was to dial in with the entire setup once it arrived. 8-9 months later the suppressor finally cleared.

I have taken it the range 6 times now. Tried 4 different brands/types/grain of factory ammo. Same results. 3 of the times at the range I was with an old friend of mine who builds customs. We were on a concrete bench, $600 rest, zero windage and noone else on the range. Would not group at 100yds. Literally flyers that sometimes would not even hit paper.

I called Fierce and they gave me the story about "lots of variables when shooting" etc etc. I told him I have purchased literally 100s of guns over my life, and never had any of them shoot this bad after trying multiple brands of ammo.

I asked for a refund, and they said no. My options are to send it back, let them shoot it. If they cant group it then its a warranty claim. If they can group it, I pay $200 for their services.

A complete nightmare and I should have went with my gut. I talked to a well known local gunsmith I use, and he said he has had no less than 5 fierce rifles brought to him this year alone, all with the same problem. His fix is trashing the Fierce barrel and going with a proof. Once he did that on the other 5 brought to him, they were great shooters.

If I do that, I am in this thing for another $1k+, and was trying to keep this under a certain budget or I would have had another custom built.. The ruger american rifle I bought my son years ago will outshoot this rifle by a landslide, and it was 1/10 the price.

Oh, and I emailed them for the serial number off the Leupold VX6HD they installed before they shipped so I can order custom turrets. They never responded after their initial response of "let me look for it".


Terrible customer service all the way around and even worse product so far. I know some people have purchased and had good luck, but not me. If you are currently in the market and thinking of Fierce, steer clear would be suggestion. Ill probably sell this one when I get it back and go another route.
 
OP
Pistol58

Pistol58

FNG
Joined
Oct 14, 2022
Messages
16
You didn’t say specifically so I’ll ask for the benefit of the group, did you shoot it without the can on it?
With the can, without the can, with the muzzle brake they sent from factory, with 2 different cans I own... all the same...
 
Joined
Jul 6, 2017
Messages
665
Location
Boise
Before trashing it and/or going through the hassle of selling of a rifle of unknown quality, I'd try disassemble, degrease, reassemble, re-torque, re-mount scope in good rings, then try another scope of known quality, and then make a decision. Lots of variables to work out before determining it's the rifle that won't shoot.
 
OP
Pistol58

Pistol58

FNG
Joined
Oct 14, 2022
Messages
16
These are just a few of the photos. I have video too. These are 3 different cartridges all at 100yds. Hornady match seemed to be the closest
 

Attachments

  • Shot 1.a.jpg
    Shot 1.a.jpg
    10.4 KB · Views: 56
  • Shot 2.a.jpg
    Shot 2.a.jpg
    12.5 KB · Views: 56
  • Shot 3.a.jpg
    Shot 3.a.jpg
    12.2 KB · Views: 56

BBob

WKR
Joined
Jun 29, 2020
Messages
4,532
Location
Southern AZ
I know everyone has their preferences, but I run leupolds on many of my rifles, and I like them.
Not getting into scope bashing but you might want to try a different scope to eliminate that as a problem. Many scopes fail to hold zero so don’t dig in and refuse to check that just because a particular brand isn’t favored around here.
 
OP
Pistol58

Pistol58

FNG
Joined
Oct 14, 2022
Messages
16
I’m starting to wonder about these carbon fiber barrels
Something seems like a common problem
I am starting to agree.

I have a good friend who purchased a Christensen Arms around the same time I did. Carbon barrel as well. He has the EXACT same problems as I am having. Gun is back with them now as we speak.
 
Top