PathFinder
WKR
Likely to regret this at some point, but this gun is a little on the heavy side for me and I'm using an F1 car as a daily driver with the 6 UM... I may be open to some options if there's any part of it a buyer isn't interested in. This is not a particularly precise barrel, it's about 1.5 MOA with this load for 10 shots. Running the numbers in WEZ, that amounts to a ~4% difference in hit rate on deer sized vital zones at around 1,000 yards. This has everything needed to ready to hunt in a fully assembled and drop tested rifle package. Between the wait times for gunsmithing and dies, this is probably the only way to get one this calendar year...
Complete turn-key package:
Complete turn-key package:
- Tikka stainless magnum action, LA bolt stop. Factory trigger spring.
- Bartlein 5r, 7.5 twist 3b barrel, 24" length
- 312 round count
- Cut with the original 6 UM reamer, so after 2-3 firings brass become clickers
- SRS 4 port Ti brake
- HCA magazine. Magnum feed lips and short action magnum shoulder stops. Feeds flawlessly.
- Manners EHT stock modified with a flat toe, negative comb, and vertical grip. 2 layers of hand laid carbon fiber.
- Removed factory filler in forend and added 2 carbon rods, plus CF/epoxy mix to fill. Aggressive free-float
- Full length bedded with CF reinforced Marinetex Grey. Steel recoil lug
- 2 side flush cups
- 36 oz, 13.5" LOP
- Grip is pretty wide and it has some imperfections, but it's a joy to shoot with.
- Rattle can paint job. Has some imperfections in pictures. 2K clear topcoat with dulled finish.
- UM Tikka rings. 30mm Low
- SWFA 5-20 HD Illuminated. Elevation turret is a little stiff from a drop test, but functions flawlessly. Accuracy 1st level included, it's been around a long time but works well.
- MKM throw lever
- Whidden custom 6 UM die set with a .271 bushing included
- 148 loaded rounds. Classic 6 UM recipe, 66 grains of N570, about .060" off the lands. 115 grain DC NR DTAC, CCI 250 primer. 50 are in ADG 6.5 SAUM brass with one firing, 100 are in ADG 6 UM brass that has only been fireformed.
- ~113 brass with anywhere from 2-4 firings that are now clickers in this chamber. Usable, but annoying. Would be fine on a chamber cut with the new reamer.
- Previous shot-out barrel included as a fire-forming barrel. This allows you to fire-form with no projectile.
- The entire rifle weighs about 11.5 lbs.
- Barreled action: $1000
- Dies w/one bushing: $300 (Must sell with or after BA)
- Ammo and Brass: $400 (Must sell with or after BA)
- Stock: $450 (Must sell with or after BA)
- Scope: $600 (Must sell with or after BA)
- Full Package: $2500
