WTS Tikka stuff -300wsm barrel - Alterra stock- Javelin bipod

Rating - 100%
16   0   0
Joined
Jan 26, 2016
Messages
1,123
Location
Fort Worth, TX
Parting out a safe queen project that I never had the time or need to really get off the ground.

30b0a781c5ca7758afa8de5349d06722.jpg



20” McGowan tikka prefit
- lite contour with muzzle flare and 5/8 thread for suppressor.
10” twist
Exactly 50 rds down the tube doing pressure tests and trying some loads, never finished, but it was showing promise and was putting everything sun moa.
Pulled the barrel and cleaned it tonight.

I’ll throw in the no-go gauge with the barrel

$320 shipped


Alterra Carbon hunter. Purchased right before they changed their name from Axial Precession.
They installed the Spartan gunsmith adapter and bedded the stock.

I added some t-nuts in the bottom and ended up using a shortened Area 419 ARCA rail, so I filled a couple of the t- nut holes. These could easily be opened back up. If you don’t want the ARCA rail, I will remove and can fill them back in as well. The filled holes are perfectly smooth and not noticeable.

$650 shipped for the stock

e43eadc606e045446cc77c544577ade8.jpg


1a549d5b0e6e409d6b69c192fba4a3e8.jpg



SOLD
Javelin bipod with 2 standard adapters and 1 mlok adapter.
$250 shipped
SOLD

b35ad1d8b46657ef0ed837273dd7cd50.jpg



*ACTION WAS SOLD*
I was planning on keeping the SS action but if you want it all I could put it back together and we can make a deal.


Sent from my iPhone using Tapatalk
 
Last edited:
OP
PantherCity
Rating - 100%
16   0   0
Joined
Jan 26, 2016
Messages
1,123
Location
Fort Worth, TX
Yes shouldered prefit and I have 1 Mountain tactical mag.


I’ll throw in the no-go gauge with the barrel

Sent from my iPhone using Tapatalk
 
Top