Pharmseller
WKR
I have 3 Gerber Pro-Guide Clip Point model 950 knives that need new homes. Gerber made these from 1990-1998 from 440C stainless steel. Manufactured in Portland. To me, this is the perfect knife for elk, and not too big for deer. I carry two in my hunting pack.
Here‘s some detail I found on a search:
“Gerber Pro Guide Series 950 Clip point blade. Gerber 950 ProGuide Series Clip Point Hunter Knife with 4 7/8" Blade & Sheath. These knives were made from 1990-1998 by Gerber in Portland, Oregon. This single plain edge clip point blade has a matte finish 440C stainless steel blade with narrow bright edge bevels measuring 4 7/8 inches in length. An arced finger rest is provided for a more forward grip and the bladed is slightly canted edge-ward. The blade markings are on the ricasso, reading 'GERBER; 950' on one side and 'PORTLAND, OR; USA' on the other. The full tang has textured black glass filled nylon grip scales secured by three pins and features a forward finger rest and a rear lanyard hole. The knife is 9¾ inches long and weighs 6 ounces. The knife comes with a black Cordura nylon sheath with a folded back belt loop and has a snap closing retention strap wrapping around the finger rest to snugly hold the knife. A tag stitched to the sheath reads 'GERBER; LEGENDARY BLADES' interspersed around a sword in stone logo with 'MADE IN U.S.A.' below. Sheathed, overall length is 10¾ inches with a weight of 7.8 ounces.”
These knives look to have been sharpened but they don’t look used. I’m not representing them as new, since I didn’t buy them new, but they look pretty good, especially #3.
Snaps on the sheaths are tight. And no, they weren’t stored in the sheath.
$80 each, you pick. Add $12 for shipping.
Number 2
Number 3
They don’t make them like this anymore.
EDIT #3 is sold
P
Here‘s some detail I found on a search:
“Gerber Pro Guide Series 950 Clip point blade. Gerber 950 ProGuide Series Clip Point Hunter Knife with 4 7/8" Blade & Sheath. These knives were made from 1990-1998 by Gerber in Portland, Oregon. This single plain edge clip point blade has a matte finish 440C stainless steel blade with narrow bright edge bevels measuring 4 7/8 inches in length. An arced finger rest is provided for a more forward grip and the bladed is slightly canted edge-ward. The blade markings are on the ricasso, reading 'GERBER; 950' on one side and 'PORTLAND, OR; USA' on the other. The full tang has textured black glass filled nylon grip scales secured by three pins and features a forward finger rest and a rear lanyard hole. The knife is 9¾ inches long and weighs 6 ounces. The knife comes with a black Cordura nylon sheath with a folded back belt loop and has a snap closing retention strap wrapping around the finger rest to snugly hold the knife. A tag stitched to the sheath reads 'GERBER; LEGENDARY BLADES' interspersed around a sword in stone logo with 'MADE IN U.S.A.' below. Sheathed, overall length is 10¾ inches with a weight of 7.8 ounces.”
These knives look to have been sharpened but they don’t look used. I’m not representing them as new, since I didn’t buy them new, but they look pretty good, especially #3.
Snaps on the sheaths are tight. And no, they weren’t stored in the sheath.
$80 each, you pick. Add $12 for shipping.
Number 2
Number 3
They don’t make them like this anymore.
EDIT #3 is sold
P
Last edited:
