The 22 creedmoor thread

swavescatter

Pain in the butt!
Joined
Apr 3, 2021
Messages
1,281
Graphite never worked for me. It dosnt stick to annealed necks like you would think, and not consistently. I havnt touched one since I tried the above method.

Fresh brass gets imperial lube in the neck, a carbide turning mandrel, and a one hour dry tumble in semi dirty media. Chamfer as normal and it loads like fired carbon covered necks.

You can dip the bullets in graphite instead, but I haven’t had issues with tight alpha brass using a 2 thou mandrel and ceramic beads with graphite…
 

Bluumoon

WKR
Shoot2HuntU
Joined
May 4, 2020
Messages
1,215
I much prefer the simple loading methods Form has described, messing w my mojo. This is a PITA.
 
Joined
Dec 30, 2014
Messages
9,768
I much prefer the simple loading methods Form has described, messing w my mojo. This is a PITA.

Run it over a mandrel or through a sizing die with expander ball. Tumble in well used media. Go forth.

Or just shoot it with large deformations, 2nd firing will be better.
 
OP
L

Lawnboi

WKR
Joined
Mar 2, 2012
Messages
8,434
Location
North Central Wi
You can dip the bullets in graphite instead, but I haven’t had issues with tight alpha brass using a 2 thou mandrel and ceramic beads with graphite…
I tried that too. Wasn’t happy with the results. I havnt used the beads or graphite in years.

Alpha is pretty good out of the box when it comes to physical dimensions. Much better the lapua or Peterson in that regard.
 

eoperator

WKR
Joined
Apr 4, 2018
Messages
1,203
I had the same thing happen to me with 2 boxes of alpha 6dasher. For whatever reason that lot gave me problems until I tried neolube given to me by a mechanic at work. It seems like very fine graphite suspended in alcohol that dries with a very nice slippery coating when applied with qtip.
1000001643.jpg
 

FB Trout

Lil-Rokslider
Joined
Jan 17, 2024
Messages
163
Spray all the insides of the necks with Hornady one shot.
This is what I do, with a q-tip sprayed with one shot, wipe the inside of the neck. Works well on new Alpha brass when loading 22 Creed, but I do with all new brass, regardless, .223, etc, on first loading.
 

mxgsfmdpx

WKR
Joined
Oct 22, 2019
Messages
6,018
Location
Outside
We are in for double digit big game kills with the 80 ELDX. My wife made an excellent shot on this doe at 208 yards. Neck shot and she dropped like she was hit by lightning. DRT.

Now I get to build another 22 Creedmoor as she wants trade her trusty old 243 in for one.

IMG_9440.jpeg

IMG_9441.jpeg
 

waspocrew

WKR
Joined
Apr 2, 2022
Messages
832
Location
MT
My alpha brass did they same thing - super tight neck tension to the point of deforming projectiles. Once I ran a mandrel through it, I was able to seat projectiles just fine. No issues after the first firing.
 

koppertop

FNG
Joined
Jul 11, 2016
Messages
73
Is anyone using the 77 LRX in the 22cm? I’ve searched but haven’t found much info. I know non lead isn’t the preferred projectile around here but I’m trying to play by the rules.

I see Barnes lists a minimum of 1:7 twist for the LRX. Has anyone tried them in a 1:8? I would like to not limit myself to the LRX, would a 7 twist limit my ability to use 77tmk, 80eldx, or 88eldm?
 

gtriple

WKR
Joined
Dec 15, 2021
Messages
1,631
Location
South Carolina
Is there any reason why you couldn't do a 22CM barrel with an outside diameter of 0.5"? Is that a bad idea?

I want to buy a PVA Taperless barrel, but I'm wondering if I could get it thinner than the 0.68". My UL AR has a Shaw barrel that is 0.5" for the last 9".
 

z987k

WKR
Joined
Sep 9, 2020
Messages
1,881
Location
AK
Is there any reason why you couldn't do a 22CM barrel with an outside diameter of 0.5"? Is that a bad idea?

I want to buy a PVA Taperless barrel, but I'm wondering if I could get it thinner than the 0.68". My UL AR has a Shaw barrel that is 0.5" for the last 9".
I have a 270 that is .565 at the muzzle. The walls are only .144 at that point.
With .500 at the muzzle, you'd have .138 walls from a 22 centerfire. .512 at the muzzle would give you that same .144
 

gtriple

WKR
Joined
Dec 15, 2021
Messages
1,631
Location
South Carolina
I have a 270 that is .565 at the muzzle. The walls are only .144 at that point.
With .500 at the muzzle, you'd have .138 walls from a 22 centerfire. .512 at the muzzle would give you that same .144
Thank you for the info!

Here's some other info I've found. Sounds like 0.137" is the bare minimum, but 0.15" is recommended.

 

mxgsfmdpx

WKR
Joined
Oct 22, 2019
Messages
6,018
Location
Outside
How'd this work out?
My son and I went out to shoot this morning. Perfect day with slight cloud cover and not even a whisper of wind.

Here is the result of my original lot from Hornady that I’ve been hunting with. 10 shot group all inside 1” square at 100. I’ve been using 3125 for my calcs, see the average here and ES on the Garmin…

IMG_9524.jpeg
IMG_9526.jpeg


And here is the 10 shot group at 100 from the newer lot, along with Garmin chrono data. Also a 1” square.

IMG_9525.jpeg
IMG_9527.jpeg


Low sample size but lines up with what I’ve seen from “groups” between the two different lots. I’ll use the unhappy lot for practice and training and keep the other lot for hunts until I run out.

UM is loading me up some 88 ELDM in Peterson brass to try out as well. I have another factory tikka barrel in 8 twist for this gun when this one is done, and an aftermarket barrel in 7 twist going on another project.
 

Bluumoon

WKR
Shoot2HuntU
Joined
May 4, 2020
Messages
1,215
My son and I went out to shoot this morning. Perfect day with slight cloud cover and not even a whisper of wind.

Here is the result of my original lot from Hornady that I’ve been hunting with. 10 shot group all inside 1” square at 100. I’ve been using 3125 for my calcs, see the average here and ES on the Garmin…

View attachment 792259
View attachment 792260


And here is the 10 shot group at 100 from the newer lot, along with Garmin chrono data. Also a 1” square.

View attachment 792266
View attachment 792267


Low sample size but lines up with what I’ve seen from “groups” between the two different lots. I’ll use the unhappy lot for practice and training and keep the other lot for hunts until I run out.

UM is loading me up some 88 ELDM in Peterson brass to try out as well. I have another factory tikka barrel in 8 twist for this gun when this one is done, and an aftermarket barrel in 7 twist going on another project.
Wish I could say I’m doing better w my hand loads, about 1.5”. Was going to be impressed if Hornady took the “bad” lot back.
 

waspocrew

WKR
Joined
Apr 2, 2022
Messages
832
Location
MT
I have a few antlerless WT tags for Wyoming still, but not sure I'll make it down before the season ends (damn family Thanksgiving trip haha). I'll shoot the remaining hunting rounds (74 gr Hammer HHT) and then toss the thermal on my 22 Creed. Anxious to shoot a few coyotes with the 62 ELDVT.

Could have used my 22 Creed on a mule deer in MT yesterday, but I'd been hunting with my 7 SAUM a lot more this season and felt confident out to 600 with it. Of course, the buck I shot yesterday was only at 315 yards haha. I'll put some big game down with the 22 CM next season.
 

mxgsfmdpx

WKR
Joined
Oct 22, 2019
Messages
6,018
Location
Outside
Also to note on my post above. I’ve chronod a high percentage of the “good” lot and haven’t really seen much more than high 30s to low 40s for ES. It averages right at 1 MOA consistently.

This new lot averages closer to 1.5-2 MOA consistently and I regularly see close to 100 ES on 10, 20, 30, 40, and 50 shot strings while practicing.

Just some minimal “data” to throw out there.

Wondering if 22 creed and an 8 twist barrel is more susceptible to accuracy degradation with larger velocity discrepancies? The 77 TMKs always shot 1 MOA as well, with an average of 30-40 ES. Does anyone think that 80 grain at 22CM velocity is right at the threshold for an 8 twist 19” barrel?

Crossed 1,000 rounds on the barrel today and it’s still 1 MOA with the “good” load so it’s not “dirty throat” or “dirty barrel” causing any issues with the other load I wouldn’t think.

Probably chasing my tail over nothing?
 

Formidilosus

Super Moderator
Shoot2HuntU
Joined
Oct 22, 2014
Messages
10,217
Wondering if 22 creed and an 8 twist barrel is more susceptible to accuracy degradation with larger velocity discrepancies? The 77 TMKs always shot 1 MOA as well, with an average of 30-40 ES. Does anyone think that 80 grain at 22CM velocity is right at the threshold for an 8 twist 19” barrel?

No. The 80gr ELD-X is just turning out to be a picky bullet- either the barrel likes them or it doesn’t, and either the powder likes it or it doesn’t.
I’ve 2x 22CM barrels now that are over 2 MOA from reloads with the 80gr X. I’ve also used one that shot very well with it too. All shoot 77gr TMK easily.
 

Matt5266

WKR
Joined
Sep 19, 2021
Messages
686
Location
SW Idaho
Also to note on my post above. I’ve chronod a high percentage of the “good” lot and haven’t really seen much more than high 30s to low 40s for ES. It averages right at 1 MOA consistently.

This new lot averages closer to 1.5-2 MOA consistently and I regularly see close to 100 ES on 10, 20, 30, 40, and 50 shot strings while practicing.

Just some minimal “data” to throw out there.

Wondering if 22 creed and an 8 twist barrel is more susceptible to accuracy degradation with larger velocity discrepancies? The 77 TMKs always shot 1 MOA as well, with an average of 30-40 ES. Does anyone think that 80 grain at 22CM velocity is right at the threshold for an 8 twist 19” barrel?

Crossed 1,000 rounds on the barrel today and it’s still 1 MOA with the “good” load so it’s not “dirty throat” or “dirty barrel” causing any issues with the other load I wouldn’t think.

Probably chasing my tail over nothing?
I have zero experience with that cartridge, but I'm definitely building one soon. Really looking forward to hearing real life data on round count in reference to barrel life.

As of now the plan is a 18" threaded barrel, 1:8 twist.
 
Top