Sold Semi Custom Mark V 300 Weatherby

Status
Not open for further replies.

drtony

WKR
Rating - 100%
10   0   0
Joined
Apr 21, 2019
Messages
316
Location
Minnesota
For sale is a Custom 300 Weatherby Magnum. Built on a Mark V Stainless Action (9 lug).

Rifle was put together by Randy Gregory of Accuracy Unlimited. Receiver was blueprinted and rifle was put together by him. Cannot remember how he bedded it, but I told him to do what was the best option

- Stainless Mark V 9 lug action (smooth as glass)
- Mark V Timney Trigger
- free floated Stainless Bartlein 5R Rem. Varmint barrel (1:9 twist) -- hand lapped by gunsmith
- Timed 4 port Beast brake
- NF mark v 20 MOA pic rail
- bipod rial
- McMillan Mark V monte Carlo Stock
- Does include stainless Talley rings (30mm i believe), original trigger, and thread protector for the 5/8 x 24 muzzle threads
- Throated to Weatherby Factory Specs

** rifle has 20 rounds through it (proper break in)
** Bipod and scope rings in pictures not for sale
** weight with NXS 2.5-10 x42 and without bipod is 11 lbs 14 oz


I have $3000+ into the rifle

Asking $2000 shipped from me to your FFL
 

Attachments

  • IMG_6216.jpeg
    IMG_6216.jpeg
    192.6 KB · Views: 98
  • IMG_6121.jpeg
    IMG_6121.jpeg
    420.2 KB · Views: 101
  • IMG_6122.jpeg
    IMG_6122.jpeg
    404.9 KB · Views: 101
  • IMG_6214.jpeg
    IMG_6214.jpeg
    273.9 KB · Views: 94
  • IMG_6215.jpeg
    IMG_6215.jpeg
    312 KB · Views: 84
  • IMG_6217.jpeg
    IMG_6217.jpeg
    223 KB · Views: 81
  • IMG_6219.jpeg
    IMG_6219.jpeg
    186.7 KB · Views: 73
  • IMG_6220.jpeg
    IMG_6220.jpeg
    279.6 KB · Views: 58
  • IMG_6221.jpeg
    IMG_6221.jpeg
    190.8 KB · Views: 76
  • E9E2998D-0729-41DD-9EF0-DA3B63B63E38.jpeg
    E9E2998D-0729-41DD-9EF0-DA3B63B63E38.jpeg
    313.8 KB · Views: 25
Last edited:
OP
D

drtony

WKR
Rating - 100%
10   0   0
Joined
Apr 21, 2019
Messages
316
Location
Minnesota
Action is trued and bedded. I cannot remember how it was bedded. Barrel is free floating. Randy Gregory is a very good old school gunsmith and I told him to do what was best for accuracy

Barrel length is 26”

Weight is 10 lbs 4oz but 1-1.5 lbs could be taken off with a barrel fluting and a little more material taken out of the stock. According to Randy it wouldn’t alter the function or accuracy of the rilfe to do so. He quoted me $125-$150 if I chose to do that.

If the rilfe doesn’t sell, I will do that so it can be about 10 lbs scopes.
 
Last edited:
Status
Not open for further replies.
Top