Putting up a rifle I had built about 3 years ago. Only reason selling is I've gotten into shooting with suppressors now that my boys are hunting and don't want to invest in a 338 can. Rather than rebarrel this I built a new 300prc. All work done by Kampfeld customs in Sandpoint ID except base was bedded by me, and trigger was worked by another gunsmith Action is from a rem 700 with PH 30 barrel stamp and B prefix on the action. Round count is around 200. It shoots Federal premium 225gr accubonds 0.75-1MOA, just over 1MOA with 230gr ELD-X, and I'm sure could shoot better with load development. Bottom metal is factory BDL. Trigger is factory but honed and adjusted at 3.25#. Gun as set up is 9lbs 11oz. Gun with base (no rings or scope) is right at 8lbs. Minimal wear from carrying in the field. Action and stock are 99%, barrel 96% on outer finish as bead blast tends to get. Bore is perfect and well cared for. I have 50 never loaded Nosler Custom brass that are up with this as well.
Estimates for price are as follows
Remington 700 LA mag bolt face $400
Bolt face/lugs, receiver trued $195
Mounting threads opened up to 8-40 $50
Douglas #4 premium SS 338 cal barrel $340
Chamber, thread and crown barrel $275
KC recoil lug $75
Thread muzzle 5/8-24 and install KC radial brake (30 ports) 25 1/16" finished, start of threads 23 1/16" $170
Ken Farrell steel 0 MOA base, bedded to action with release agent. $118
McMillan Sako hunter olive tan and black swirl, standard fill, front and rear studs $600
KC skim bedding $125
Bead blast barrel $35
Black cerakote on action/bottom metal $160
Nosler Custom 338wm brass, new in box. $119
I'd prefer to keep the rings and scope and sell rifle/base and brass. But if it has to go all together.....
Seekins 30mm medium rings $130
Nightforce SHV 3-10x42 MOAR illum $800 (I'm second owner and it is in flawless condition)
VERY much prefer FTF in N Idaho, could also meet in E WA or W MT. Too many scam stories lately. We travel some for sports in the summer to Boise, Tri-Cities, Missoula, etc. Not in a hurry to sell.
Total comes to $2546 for the rifle/base. Asking $2200, and can throw in the brass.
With rings/scope would be $3476, asking $3100 and will throw in the brass.
No offers will be accepted on the carpet. It's not for sale.
Estimates for price are as follows
Remington 700 LA mag bolt face $400
Bolt face/lugs, receiver trued $195
Mounting threads opened up to 8-40 $50
Douglas #4 premium SS 338 cal barrel $340
Chamber, thread and crown barrel $275
KC recoil lug $75
Thread muzzle 5/8-24 and install KC radial brake (30 ports) 25 1/16" finished, start of threads 23 1/16" $170
Ken Farrell steel 0 MOA base, bedded to action with release agent. $118
McMillan Sako hunter olive tan and black swirl, standard fill, front and rear studs $600
KC skim bedding $125
Bead blast barrel $35
Black cerakote on action/bottom metal $160
Nosler Custom 338wm brass, new in box. $119
I'd prefer to keep the rings and scope and sell rifle/base and brass. But if it has to go all together.....
Seekins 30mm medium rings $130
Nightforce SHV 3-10x42 MOAR illum $800 (I'm second owner and it is in flawless condition)
VERY much prefer FTF in N Idaho, could also meet in E WA or W MT. Too many scam stories lately. We travel some for sports in the summer to Boise, Tri-Cities, Missoula, etc. Not in a hurry to sell.
Total comes to $2546 for the rifle/base. Asking $2200, and can throw in the brass.
With rings/scope would be $3476, asking $3100 and will throw in the brass.
No offers will be accepted on the carpet. It's not for sale.
Last edited: