Sold Semi Custom 257 Wby Vanguard Fluted, Ceracote, MCM Stock, Timney Trigger

Status
Not open for further replies.
Rating - 100%
33   0   0
Joined
Dec 23, 2020
Messages
630
Thought this was sold but buyer backed out. So back up it goes.

I have bought and sold here for years with no issues. I prefer a check I wait till clears, usually 2 or 3 days, but will take also take zelle.

I will also need an FFL or will sell FTF in Houston TX area. FFL must accept from an individual with a copy of my DL and receipt.

This started as a 257 Weatherby Vanguard First Light edition. 26" fluted light #2 contour barrel with removable break and thread cover, I have the cover on it now. It is cerakoted a vaery nice coyote color.

I added a Timney trigger, it has the 3-position safety.

I then fully bedded it, action and bottom metal into a Mcmillan Mcswirley camo standard fill Mcm Hunter Stock.

It is a great gun, LOVES 100 TTSX, 80 TTSX, 85 Ballistic tips, 110 Accubonds and 110 Interbonds. You can get any of those to shoot sub MOA in this gun. the 100 TTSXs and 110 Accubonds were .6" 3 shot groups. I shot a sub 4 inch 600 yd yard with the gun. 10 X scope off a pack prone.

It didn't like some 75 grainers I tried.

About 250 down the bore.

I have TONS of bullets, ammo, dies and brass I will offer to the buyer of the rifle first, so until it sells don't ask.

Gun is like new and weighs 6 lbs 15.8 oz naked.

The base first light rifle in the plastic stock is 950 ish real world price, the timney 150 ish and the MCM 600 ish these days.

Asking $1200 shipped.

I have more pics I can email or text.
 

Attachments

  • IMG_2499.jpeg
    IMG_2499.jpeg
    146.4 KB · Views: 71
  • IMG_2498.jpeg
    IMG_2498.jpeg
    74.4 KB · Views: 67
  • IMG_2492.jpeg
    IMG_2492.jpeg
    143.1 KB · Views: 67
  • IMG_2497.jpeg
    IMG_2497.jpeg
    83.2 KB · Views: 67
  • IMG_2496.jpeg
    IMG_2496.jpeg
    74.6 KB · Views: 67
  • IMG_2495.jpeg
    IMG_2495.jpeg
    93 KB · Views: 69
  • IMG_2494.jpeg
    IMG_2494.jpeg
    128.2 KB · Views: 67
  • IMG_2493.jpeg
    IMG_2493.jpeg
    49.3 KB · Views: 64
  • IMG_2491.jpeg
    IMG_2491.jpeg
    104.1 KB · Views: 67
  • IMG_2490.jpeg
    IMG_2490.jpeg
    264 KB · Views: 68
OP
S
Rating - 100%
33   0   0
Joined
Dec 23, 2020
Messages
630
I have the break and factory installation tool.
 

Attachments

  • IMG_4300.jpeg
    IMG_4300.jpeg
    356.7 KB · Views: 15
  • IMG_4299.jpeg
    IMG_4299.jpeg
    122.6 KB · Views: 15
  • IMG_4298.jpeg
    IMG_4298.jpeg
    132.8 KB · Views: 15
  • IMG_4297.jpeg
    IMG_4297.jpeg
    168.8 KB · Views: 15
Status
Not open for further replies.
Top