black dawg
WKR
In the past I have always set the bullet .010 off of the lands during initial load development, and after a powder charge worked out, would play with the seating depth. I have tried several bullets in this 300wm (700lr) that I have had to play with seating depth before playing with the powder to get any readable result.
Have I been doing it backwards and just been lucky all these years?
the bullets that have given me trouble in this rifle are the 210 ablr...ended up at stock coal for best accuracy
180 partition, also loaded pretty short, and I am trying a 178 eldx right now that is not working out very good.
I have tried several other bullets, and have made a 210 berger shoot real good <3/4 with a slight jam.
Maybe I need to try some different powders, I have been using h4831 and h1000 with the best results from h1000
Have I been doing it backwards and just been lucky all these years?
the bullets that have given me trouble in this rifle are the 210 ablr...ended up at stock coal for best accuracy
180 partition, also loaded pretty short, and I am trying a 178 eldx right now that is not working out very good.
I have tried several other bullets, and have made a 210 berger shoot real good <3/4 with a slight jam.
Maybe I need to try some different powders, I have been using h4831 and h1000 with the best results from h1000