Remy 700 blue printing deal

[Chad44]

Long rifles inc. is doing a pretty sweet deal on blue printing 700 actions and chambering barrels. Check out their site. I have motives for posting this. I sent my barrel and action to them and they are waiting for 10 actions to come in before they run them. It is a group buy on snipers hide but he has the forms and info on his site too. If anyone is on the fence about blue printing this is a sweet deal IMO. I hope I'm not breaking any rules posting this.
Chad

 

[30338]

Chad, I can never figure out what the pricing is on that deal. I am waiting on my pacnor, 5 months so far, and as soon as it arrives will need it put together. How much to blueprint, chamber, thread, and pillar bed? I didn't get a response from them months ago so blew them off and don't feel like digging through pages of posts on SH. Thank you

 

[Chad44]

Here is the pricing. Everything is on the cheapest tier because the group buy went well. As far as bedding just call. I had no luck with email but they answered the phone every time I called. Hope this helps. The group but was based on barreled actions but I know he does stock work too.
Receiver/Bolt work: Participation based Pricing Schedule: 0-50/51-75/76-125/126+
1. Tier One M700 accurizing package $200/$175/$150/$125

Additional Options:
A. 8-40 scope base hole work (Optional) $65/$55/$45/$35
B. Bolt Fluting in any standardized pattern $60/$55/$50/$45
C. Tactical Bolt Knob installation (labor only) $60/$55/$50/$45
NOTE*: RATES DO NOT INCLUDE ANY METAL FINISHING

Barrel Fitting Work Participation based Pricing Schedule 0-50/51-75/76-125/126+
1. .390” and .480” and .545” Bolt face S/A Cartridges $250/$235/$225/$200
2. .480” and .545” Bolt face L/A Cartridges $265/$255/$235/$225
3. .590” Bolt Face L/A Cartridges $275/$265/$255/$250

NOTE*: RATES DO NOT INCLUDE ANY METAL FINISHING OTHER THAN STANDARD POLISH
*Barrel Fitting Options: Participation based Pricing Schedule: 0-50/51-75/76-125/126+[/B]
1. Threading for muzzle cans, recoil reduction devices $80/$70/$65/$55/$50
2. Thread protectors $40/$40/$35/$30



Metal Finishing: Participation based Pricing Schedule: 0-50/51-75/76-125/126+
1. Standard polish barrel finish FREE/FREE/FREE/FREE
2. Glass Bead Media Blast Finish $30/$25/$20/$15
3. Oven Cure Ceracoat (Barreled action only*) $175/$155/$135/$125
*NOTE: “Barreled Action” means: Barrel/Muzzle Device
when applicable, Recoil Lug, Receiver,Bolt/Bolt knob
when applicable, and Bolt Shroud ONLY
4. Oven Cure Ceracoat (Action only*) $130/$125/$120/$115
*NOTE: “Action Only” means: Receiver, Bolt/Bolt knob
when applicable, and Bolt Shroud ONLY
5. Oven Cure Ceracoat (Barrel only) $65/$60/$50/$40
6. Hot Tank Parkerize ( Carbon Steel Actions only) $50/$45/$40/$30
NOTE: Processes like Melonite, cryogenic treatment, etc are NOT being offered. We are limiting this GB to what’s listed in this initial offer. DO NOT send us a barrel that has been surface nitride (melonite) treated.

Additional Incentive:
Complete Package* Recipients are eligible for FREE RETURN SHIPPING VIA USPS PRIORITY MAIL
NOTE* “Complete Package” defined as: Tier One Accurization, Bolt Fluting, Tactical Bolt knob installation, 8-40 base hole modification, Barrel fitting in any chambering w/wo muzzle device, and ceracoat work.

 

[Chad44]

Forgot to add that you can pick just one or all the options. In other words if you only have the action you can get it blue printed. If you have a custom action but need a barrel put on it they will do that too. I just thought $125 to blue print was cheap and guys on snipers hide seem to be please with his work.

 

[sneaky]

I had them flute a bolt and do a custom firing pin assembly on a 700 and they did a really good job on it.

 

[30338]

Looks like solid pricing. Need my pacnor to hurry up and will consider using them.

 

[30338]

Viewed their bedding process on the custom rigs. That is quite impressive.

 

[Chad44]

I know. He creates an exact blue print of your action and plugs it into the mill/cnc machine. Pretty tricky stuff.

 

[Chad44]

If anyone is on the fence about this you better jump. He is about to close the group buy. Mine will be done by next week. Can't wait.