WTB Remington 700 SA Stock

Rating - 100%
3   0   0
Joined
Feb 4, 2022
Messages
61
Looking for a Remington SA stock for my kids 7mm-08 build. Was in a Magpul when it was a .243 but not wanting to go back with it when it’s finished. Open to slightly higher end like Manners/McMillan or Mesa/AG but not opposed to HS Precision or Hogue. Also not opposed to a wood stock in good to great shape. Not looking for a chassis
 
Rating - 100%
111   0   0
Joined
Aug 3, 2022
Messages
547
I have a brand new boyd’s wood thumb hole
Stock. Let me know if you want pics


Sent from my iPhone using Tapatalk
 
Rating - 100%
15   0   0
Joined
Dec 28, 2013
Messages
804
Location
Dallas
I have a Manner EH6 dipped in Kuiu Vias-- the barrel channel is slightly wider than factory (3/3b), was previously bedded but the lug has been milled back out.
 
Rating - 100%
44   0   0
Joined
Dec 27, 2019
Messages
949
I have a super boyds overmolded listed in the classified ads if your interested.. Should be a perfect fit with full aluminum bedding, pillars, etc..
 
OP
704kubotaguy
Rating - 100%
3   0   0
Joined
Feb 4, 2022
Messages
61
I have a Manner EH6 dipped in Kuiu Vias-- the barrel channel is slightly wider than factory (3/3b), was previously bedded but the lug has been milled back out.
PM sent
I have a Manner EH6 dipped in Kuiu Vias-- the barrel channel is slightly wider than factory (3/3b), was previously bedded but the lug has been milled back out.
pm sent
I have a super boyds overmolded listed in the classified ads if your interested.. Should be a perfect fit with full aluminum bedding, pillars, etc..
I’ll check it out thanks. Bottom inlet on Hogues are standard inletted correct not M5?
 
Rating - 100%
44   0   0
Joined
Dec 27, 2019
Messages
949
The Hogue is setup for 700 BDL short action with oversized barrel channel for the tactical barrel profile..
 
Top