Looking for short barreled 7mm velocity data

MHWASH

WKR
Joined
Aug 21, 2016
Messages
807
Location
S.E.WA
I’m still debating on my next rifle cartridge. I’m considering any 7mm between the 7-08 to 280AI. Will be running a suppressor, barrel length 18”-22”. Build will be based either on my Rem 700 .270, or Tikka.
 
Joined
Oct 6, 2020
Messages
1,192
Location
northwest
I recently built an 18" 7-300 wsm improved on a tikka action.
Shooting suppressed I ended up at 2900 with 168 bergers, and 2875 with the 175 ELDX.
If you're set on a non magnum the 280 ai would be your best performer, I'd guess 2750-2800 would be doable at 18" with a 168
 

Tahoe1305

WKR
Joined
Jun 9, 2019
Messages
1,985
Location
CO
I got 2850 with 140g AB out of 22” barrel 7-08. Would be a great medium game round but if you want to shoot 160+ bullets I’d go 280AI or larger.

My 7 Wsm with 175 eldx in a 23” is at 2975fps.

280AI is a cool round, especially if you aren’t paying a penalty in action size like in a tikka.
 

B23

WKR
Joined
Aug 17, 2017
Messages
1,008
Location
NW
The 280AI is always going to outrun a 7-08 no matter what barrel length. There's going to be about 150'ish fps difference between the two but the 280AI is going to use right around 20 more grains of powder to do it.

With a 168 in the 280AI and a 20in tube you'll be around 2850 using 65gr of powder. The 7-08 with same bullet same 20in pipe will be around 2700 using 45gr powder.

What about a 284? A 284 w/168 20in tube will pretty much match the 280AI.

Brass quality favors the 284 and 7-08 as both have easily available Lapua brass.

With that standard bolt face LA Rem 700 you can pretty much make that anything you want because the bolt face is easily opened up so maybe take a look at a 7 SAUM or 7 WSM.
 
OP
MHWASH

MHWASH

WKR
Joined
Aug 21, 2016
Messages
807
Location
S.E.WA
The 280AI and 7SAUM are pretty much ballistic twins. So if using the Rem action, does one make more sense than the other?

If the 284 could match 280AI velocities, I’d go that route, but the load manuals are showing the 284 velocities around 2800 w/168s @24”.
 
Last edited:

hereinaz

WKR
Rokslide Sponsor
Joined
Dec 21, 2016
Messages
3,015
Location
Arizona
I got 2800+ with 168 VLD in a buddy’s 20” 280 ai.

Basically take 25 fps off per inch from known data down to 19 inches and you’ll be close. Your barrel could make it faster or slower it is prolly that close.
 

rickiesrevenge

Lil-Rokslider
Joined
Oct 16, 2017
Messages
281
Location
Alaska
I have had several 7mm Dakota xp-100s with 18" barrels. Still have one. Mostly used 180-195s. Current 18" bartlein barrel is shooting 190 matrix at 2785fps with retumbo. RL33 gets more speed but this load shoots good!

Also have a 14" 284win. Use 142 Lehigh controlled chaos @2640 in that.

Aaron

Sent from my SM-A326U using Tapatalk
 
Joined
Aug 25, 2021
Messages
341
Location
SE Wisconsin
I have a Remington Model 7 7mm08 with 20 inch barrel. I am using 131 grain Hammer Hunters. With my best load of Varget I am getting 2950fps. I had to put a lot of work into the gun. I replaced the trigger with a Timney and put a new HS stock on it.

chris
 
Top