LH Shooter Bow Tuning

[Cwlauger]

Ok I’m new to working on my bow.

Just changed string and getting gnarly nock right tear.

Cams are synched. Rest is at center shot.

I’m looking at yoke tuning and getting confused. Is yoke tuning and cam lean same regardless of what side of the bow you shoot on?

I know I need to tighten one side of yokes and loosen the other. But which one? And do I do equal tightening and loosening on top and bottom yokes?

 

[Mighty Mouse]

Nock right tear = add twists to right yoke and subtract twists from left yoke (same for right-handed and left-handed shooters)

I would adjust twists in the same amount on both the top and bottom cams.

Here’s a handy tuning guide from Gold Tip. Every adjustment listed is the same for RH and LH shooters.

 

[Cwlauger]

Nock right tear = add twists to right yoke and subtract twists from left yoke (same for right-handed and left-handed shooters)

I would adjust twists in the same amount on both the top and bottom cams.

Here’s a handy tuning guide from Gold Tip. Every adjustment listed is the same for RH and LH shooters.
View attachment 855467
View attachment 855468

Awesome thank you!

On my PSE Mach30 with gas strings the yokes are one piece (and a pain in the butt to twist/untwist). Should I still be twisting one side and untwisting other? And do that one too and bottom cam?