Lawson Cordage for Cimarron Light?

Joined
Aug 17, 2015
Messages
2,123
Location
Iowa
Wanting to get some of their glowire for the guy outs on a cimarron light...which diameter is best? Is the 2mm adequate, or is it better to bump up to the 2.5?

And is a 50’ chunk plenty?

Anyone swap out the cordage for the line-locs at the base of the tent with glowire too, or is that unnecessary?
 

Carrot Farmer

WKR
Classified Approved
Joined
Apr 19, 2020
Messages
939
Location
Central Oregon
I just bought off Amazon, use continuous line on each side, & taught-line hitch for my Kifaru Sawtooth.


Sent from my iPhone using Tapatalk
 
Joined
Dec 26, 2013
Messages
3,872
Location
Edmond, OK
I'm using 2mm Lawson glow wire all around my Tut without issue. Also using it for my stake loop extensions to let me pitch it 4-8" off the ground.
 

Jbehredt

WKR
Joined
Mar 4, 2017
Messages
1,776
Location
Colorado
Same setup as mrbill on my redcliff and silvertip. Love that glowire when I’m looking for camp in the dark.
 
Joined
Nov 15, 2018
Messages
3,000
Not to totally derail, but how does that 2mm Lawson cord lock down on knots? I’ve been using the reflective 3/32 Atwood rope and it doesn’t hold reliably. Seems too stiff.
 

Trial153

WKR
Joined
Oct 28, 2014
Messages
8,225
Location
NY
2mm or 2.5 will work fine. I have the 2mm on my sawtooth and it’s been solid. Can’t go wrong with any of lawsons cordage. Great company to buy from.
 

PNWGATOR

WKR
Shoot2HuntU
Joined
Oct 14, 2014
Messages
2,739
Location
USA
Dig into whatever Andrew Skurka offers for insight regarding cordage and tension on anchors. He has about as much first hand experience as anyone and I’d be hard pressed to look beyond his recommendations.
 
OP
cornfedkiller
Joined
Aug 17, 2015
Messages
2,123
Location
Iowa
I'm using 2mm Lawson glow wire all around my Tut without issue. Also using it for my stake loop extensions to let me pitch it 4-8" off the ground.

Do you use the line-loc tensioners? Does the 2mm work fine in those? Enough bite to hold them in place?
 

Kevin_t

WKR
Rokslide Sponsor
Joined
Dec 2, 2012
Messages
1,162
Location
Colorado
FYI … if you are using the line locs they will hold tension better at 2.5 mm to 2.75mm . I had Lawson make us a special 3mm but we didn’t offer it .

What we provide is 2.75 sterling rope . 2.5 can work but will loose tension at times


Sent from my iPhone using Tapatalk
 
OP
cornfedkiller
Joined
Aug 17, 2015
Messages
2,123
Location
Iowa
FYI … if you are using the line locs they will hold tension better at 2.5 mm to 2.75mm . I had Lawson make us a special 3mm but we didn’t offer it .

What we provide is 2.75 sterling rope . 2.5 can work but will loose tension at times


Sent from my iPhone using Tapatalk

Thank you! Exactly the information I was looking for.
 
Joined
Dec 26, 2013
Messages
3,872
Location
Edmond, OK
Do you use the line-loc tensioners? Does the 2mm work fine in those? Enough bite to hold them in place?
Yes, I use line loc tensioners on the guy outs and stake loops. Here are the two types I use. Works perfectly with my 2mm line and I purchased them from zpacks.com
 

Attachments

  • D5E34013-8DA6-447D-B223-6400F5887CDD.jpeg
    D5E34013-8DA6-447D-B223-6400F5887CDD.jpeg
    104.4 KB · Views: 25
  • 5A82509D-47F5-4E8D-BCE7-4CC4576E8CFA.jpeg
    5A82509D-47F5-4E8D-BCE7-4CC4576E8CFA.jpeg
    96 KB · Views: 25

Wiscgunner

Lil-Rokslider
Joined
Jun 24, 2018
Messages
241
Location
Madison, WI
I love the 2mm Lawson Glowire on my Cimarron, bright orange in daylight, super visible at night. Holds knots well. I use taut-line hitch knots for tension instead of linelocs
 
Top