HHA tetra RYZ 2 pin

[KClark91]

Looking at upgrading my cbe tactic hybrid 1 pin and was looking at the HHA tetra Ryz 2 pin. I swapped from a 5 pin to the single pin and shot much better without all the pins blocking my sight. As much as I like the single pin I feel having the additional option on the post would help for whitetail when I don’t have time to adjust the dial.

 

[doncarpenter]

I have the Tetra Ryz on my main hunting bow. I really like it. If you take the time to know your pin gap and practice shooting the distances in between, you shouldn't have to adjust the sight while hunting whitetail.

Sent from my SM-S911U using Tapatalk

 

[KClark91]

I have the Tetra Ryz on my main hunting bow. I really like it. If you take the time to know your pin gap and practice shooting the distances in between, you shouldn't have to adjust the sight while hunting whitetail.

Sent from my SM-S911U using Tapatalk

Yea that’s what I’m looking for I had a single pin and practiced enough when I went out for elk I could set it at 30 and be fine from about 20-40 but for deer I’d want a little more but still don’t want to go back to the 5 pin

 

[TheHammer]

I enjoy mine on my new setup. No regrets! 7 years ago I switched from a 5 pin to a single and that will remain in my elk setup but my deer/antelope and hog bow is rocking the 2 pin.

 

[KClark91]

I enjoy mine on my new setup. No regrets! 7 years ago I switched from a 5 pin to a single and that will remain in my elk setup but my deer/antelope and hog bow is rocking the 2 pin.

Yea I loved going from the 5 to single but want one sight for elk and wt and really like the look of that one. I know there’s some variance but when you have the top pin set at 20 & 25 where does the second pin show?

 

[TheHammer]

Yea I loved going from the 5 to single but want one sight for elk and wt and really like the look of that one. I know there’s some variance but when you have the top pin set at 20 & 25 where does the second pin show?

This one is currently set at 20/25 no difference. That target was at 36yds I aimed for the slice in the x with both pins from that distance. That is the variance. Bottom pin would be 46yds.

Bow elite carbon era, elite 75lb limbs, speed mods, gas high octane string, 29&5/8” draw. Set at 76lbs.

Arrow 508gr rip ss w/ victory outsert and 125gr tip

 

[KClark91]

This one is currently set at 20/25 no difference. That target was at 36yds I aimed for the slice in the x with both pins from that distance. That is the variance. Bottom pin would be 46yds.

Bow elite carbon era, elite 75lb limbs, speed mods, gas high octane string, 29&5/8” draw. Set at 76lbs.

Arrow 508gr rip ss w/ victory outsert and 125gr tip

So the two would be 20/25 and about 45? I shoot’s a 70lb 30” at about 475 arrow total weight. I was hoping the gaps would be around 25 & 40 that way I could set the top at 25 and be good anywhere to 40 for wt

 

[doncarpenter]

So the two would be 20/25 and about 45? I shoot’s a 70lb 30” at about 475 arrow total weight. I was hoping the gaps would be around 25 & 40 that way I could set the top at 25 and be good anywhere to 40 for wt

You should have no problem getting close to those pin gaps. I shoot 29" 70lbs with a 475 grain arrow. My top is 20 and bottom is 37.

Sent from my SM-S911U using Tapatalk

 

[KClark91]

You should have no problem getting close to those pin gaps. I shoot 29" 70lbs with a 475 grain arrow. My top is 20 and bottom is 37.

Sent from my SM-S911U using Tapatalk

Ok thanks that exactly what I was looking for. How do you like the sight?

 

[KClark91]

You should have no problem getting close to those pin gaps. I shoot 29" 70lbs with a 475 grain arrow. My top is 20 and bottom is 37.

Sent from my SM-S911U using Tapatalk

Ok thanks that exactly what I was looking for. How do you like the sight

 

[CB4]

I would look at the X3. I have found 3 pins is a very happy medium and love having an indicator needle for each pin. Either way HHAs are great.

 

[TheHammer]

So the two would be 20/25 and about 45? I shoot’s a 70lb 30” at about 475 arrow total weight. I was hoping the gaps would be around 25 & 40 that way I could set the top at 25 and be good anywhere to 40 for wt

A few variables, but you shouldn’t have an issue getting 25/42-45. It’s a great sight imo.