Help with 2004ish PSE TYPHOON

[Taylord9]

I have a pse typhoon that my buddy gave me. I need the draw length adjusted because it’s super short on me. I’d there any way to tell if that’s possible? Can’t find anything on the Google machine. This number is stamped on it

 

[OR Archer]

That has a bolt on mod. Your chances of finding the correct one are pretty slim though.

You can look here to figure out the correct mod you’ll need for your draw

PSE Compound Bow Tune Charts

psearchery.com

 

[OctoberGold]

Can you take a couple better pictures of the bottom cam? I had a PSE single cam around that era and the draw length could be adjusted just by moving the mod, you didn't need to actually swap the mod out.

 

[dtrkyman]

better cam pics, I may have a couple mods for it?

 

[Taylord9]

These the pics you need? I don’t know what any of the numbers and letters mean

 

[Taylord9]

better cam pics, I may have a couple mods for it?

 

[OctoberGold]

If I’m seeing it correctly it looks like you have an 8 mod on there (red line on picture). If you can find a 9 it should get you out to 30”.

 

[Taylord9]

If I’m seeing it correctly it looks like you have an 8 mod on there (red line on picture). If you can find a 9 it should get you out to 30”.
View attachment 384448

Sweet. And is the 8 mod maxed out? Or is it not adjustable

 

[OctoberGold]

Sweet. And is the 8 mod maxed out? Or is it not adjustable

Not adjustable best I can tell. Your draw stop is in the 9 position which is probably giving you a slightly longer draw length than 29" and a higher letoff. You typically want to draw stop setting and mod # to correspond. The numbered/lettered post settings might get you some additional adjustment, but I don't remember enough about it to be useful.

 

[dtrkyman]

The number 8 is maxed on the modules, The cam has multiple posts to attach the string, one on each side, you need to put it on the A and the 1 and you will be at max draw. It will increase it half to 3/4 inch if I remember correctly, also add about 5lbs of draw weight.

With some tweaks to the cable and string you can get another half inch I bet as well, untwist the string slightly and twist the cable and yoke will get you that.

What do you think your draw length is, many get set up way too long, not sure where you are located but a decent pro shop can easily handle it, if they tell you they can't or it's not right, they are just not up to speed on the older bows.

I have made those tweaks hundreds of time to fit bows to guys!

 

[Taylord9]

The number 8 is maxed on the modules, The cam has multiple posts to attach the string, one on each side, you need to put it on the A and the 1 and you will be at max draw. It will increase it half to 3/4 inch if I remember correctly, also add about 5lbs of draw weight.

With some tweaks to the cable and string you can get another half inch I bet as well, untwist the string slightly and twist the cable and yoke will get you that.

What do you think your draw length is, many get set up way too long, not sure where you are located but a decent pro shop can easily handle it, if they tell you they can't or it's not right, they are just not up to speed on the older bows.

I have made those tweaks hundreds of time to fit bows to guys!

I’m in Spokane Wa. There is a good shop here I can take it I they will do that I’m sure. I’m between 29.5 and 30 I’m not sure what this is at right now buts it’s too short.

 

[dtrkyman]

Short axle bow, at max DL. it is likely 29, keep in mind most bows run longer than what is stated on the modules!

 

[Taylord9]

Short axle bow, at max DL. it is likely 29, keep in mind most bows run longer than what is stated on the modules!

If I move the other deals to 1 and a it might Make it a bit longer though you say?

 

[Bamf_Pa]

I had that bow, the shop set it up at 30 inches but I don’t remember the cams at all. I do remember it being jumpy but a decent shooter at the time. Very little valley at 65% let off just a heads up.

 

[dtrkyman]

If I move the other deals to 1 and a it might Make it a bit longer though you say?

Yes, it is likely 29 at the number 8 the way it sits.