Hanging/Drying Gear in Cimarron

Ross

Super Moderator
Staff member
Joined
Feb 24, 2012
Messages
4,806
Location
Kun Lunn, Iceland
As Tim noted short limbs on the pole I also added these on two sides but have not tried yet but believe they will work very good you can then run a tight line and wrap around pole
 

Attachments

  • 498556B5-56A2-4A50-9BE9-86AEB9BA2FB7.jpeg
    498556B5-56A2-4A50-9BE9-86AEB9BA2FB7.jpeg
    51.1 KB · Views: 74
  • 7D2A342A-DDFF-495D-B81F-3E9272336247.png
    7D2A342A-DDFF-495D-B81F-3E9272336247.png
    1.7 MB · Views: 74
  • 889A74EE-52C3-4634-9A56-B6891B266938.jpeg
    889A74EE-52C3-4634-9A56-B6891B266938.jpeg
    71.8 KB · Views: 75
  • 14AB8AC9-50E4-4445-A3FE-1ABAA1CB244A.jpeg
    14AB8AC9-50E4-4445-A3FE-1ABAA1CB244A.jpeg
    109.4 KB · Views: 80
  • D3947EA2-3529-4CC4-9480-B5BEB537C025.jpeg
    D3947EA2-3529-4CC4-9480-B5BEB537C025.jpeg
    149.2 KB · Views: 81
  • 4E2226D3-E47E-48EA-AF74-91B4626870EE.jpeg
    4E2226D3-E47E-48EA-AF74-91B4626870EE.jpeg
    74.6 KB · Views: 82

AKHUNTER

Lil-Rokslider
Joined
Sep 30, 2013
Messages
222
Location
Interior Alaska
I have been using this setup for years in my Ti Goat tipi. It's just aluminum rod stock from the hardware store. Put a bend in one end and use 2 hose clamps to attach it to the center pole. I put rods down low for socks, hats, and gloves and rods up high for coats and pants. Bring some clothes pins.
 

Attachments

  • glove rack.jpg
    glove rack.jpg
    232.6 KB · Views: 70

Clarktar

WKR
Joined
Aug 30, 2013
Messages
4,288
Location
AK
I have a 2ft long PVC pipe with a cap that I slip over the center pole for my tipi shelter. I have a bunch of holes drilled in it. I then have some thing guage wire I bend into s-hooks and put them into the holes. I hang stuff off the hooks. I like that everything is up high out of the way and where most the heat is....

Sent from my SM-G973U using Tapatalk
 
Top