Hamskea Trinity Pro cable on a Prime Centergy

[Skull10]

I’ve got a Prime Centergy Hybrid that shot great with a QAD arrow rest. I bought a Hamskea Trinity Pro rest as an upgrade this year.

I am wondering where do others that have this combo tie the cable for the rest on the bottom limb? The Prime Centergy, like most Prime bows have a double cam. My bow has solid limbs and there just doesn’t seem to have enough room for the cable and the cam to rotate with out it hitting the cable.

 

[OR Archer]

On the prime you only have one option for tying the cable and that’s at the front of the cam. On the primes I will only do one wrap around the limb to keep the bulk down for cam clearance. The supplied cord is small diameter so it’ll clear the cam.

 

[Skull10]

Great information, thanks for the photo. You just use one wrap on the limb opening in front of the cam? So that would mean the string passes trough the inside of the limb opening twice, correct

 

[OR Archer]

No it’ll only pass through once. On other bows with more cam clearance I pass it through twice.

 

[Skull10]

Understood, thanks

 

[Samdemarais]

On the prime you only have one option for tying the cable and that’s at the front of the cam. On the primes I will only do one wrap around the limb to keep the bulk down for cam clearance. The supplied cord is small diameter so it’ll clear the cam.

I have mine tied to the axle stud. That is where Devin Hall from hamskea recommends tying it.

 

[40tude]

Axle stud here as well

 

[wadegarrett]

Used to do axle stud as well until by quiver got in the way, now just one loop with a gripper (underside) near the cam.