WTS Defiance Ti-X MDT HNT26 Folding Arca 6mm Creedmoor 16” PBB Carbon Fiber Barrel 1:7.5 Twist, 5/8x24 Threaded

Cmack0102

FNG
Rating - 100%
1   0   0
Joined
Oct 8, 2024
Messages
43
$3500 shipped to your FFL

This is a 6mm Creedmoor rifle built off a Defiance Ti-X action mounted in a folding Arca MDT HNT26 chassis.

The barrel is a 16" carbon fiber wrapped barrel from Preferred Barrel Blanks. 1:7.5" twist with 5/8-24 threading.

The barrel is just about broken in with 160 rounds through it.

There are photos showing small cosmetic markings to the magnesium on the chassis. Otherwise, it is in great condition and was only taken on one hunting trip.

Factory 108gr ELD-M ammunition was getting 2700fps.

Weight is shown at 5.2lbs without optic or muzzle device.

The trigger is a Triggertech Diamond 2-stage, flat.

All of the factory hardware is included (length of pull spacers and stud mounts).

This was built in August of 2025.

The MSRP on all these components is $5,120

This is a short action. If you wanted a different caliber, Defiance prefits are readily available.

If you’re interested in just the barreled action with trigger, I would consider an offer. I will not sell the action without the barrel. I will not sell the chassis alone unless I’m able to sell the barreled action first.
 

Attachments

  • IMG_3591.jpeg
    IMG_3591.jpeg
    439.1 KB · Views: 16
  • IMG_3580.jpeg
    IMG_3580.jpeg
    432.6 KB · Views: 16
  • IMG_3577.jpeg
    IMG_3577.jpeg
    223.9 KB · Views: 13
  • IMG_3587.jpeg
    IMG_3587.jpeg
    324.3 KB · Views: 13
  • IMG_3588.jpeg
    IMG_3588.jpeg
    332.1 KB · Views: 12
  • IMG_3586.jpeg
    IMG_3586.jpeg
    321.9 KB · Views: 12
  • IMG_3589.jpeg
    IMG_3589.jpeg
    287 KB · Views: 12
  • IMG_3595.jpeg
    IMG_3595.jpeg
    443.7 KB · Views: 12
  • IMG_3594.jpeg
    IMG_3594.jpeg
    584.8 KB · Views: 15
Back
Top